What Have You Done To Your 3rd Gen Today?

No photos...because who wants to see license plates...but I finally got my vehicle registration and was able to put my plates on. And more importantly take that damn temporary window sticker down.

 

Doing mine today!

 

I added the Tacoma Track Mount from Expedition Essentials.

Black Ram mounting system that bolts to the radio. Very secure. A few holes to be drilled but not hard and definitely not noticeable with the mount on.

I like the Ram mount style cause you can move around/add/remove the holders in necessary.

 

Do you have a part number? Or a link to the posts you referenced?

 

I bought all the stuff to do the drain line extension mod but since I had the leak I knew better than to put that on the line then take it in complaining of water leaking inside. Once the leak gets taken care of, been there 2 1/2 days now, I will add the extension so my frame doesn't stay wet constantly. Good idea on the screen especially if the critters have been inside there before.

 

What tires are those? Do you have anymore info on your set up? More photo's?

 

How did you get the plate mounted to the rear panel of the center console?

 

It’s the Cali raised and blue overland I think

 

I like the efficiency you have keeping the tape measures open. Saves time for the next measurement.

 

To infinity and beyond!

 

thank you… stock suspension, 265/70/17 KO2’s… they really filled it out nicely.

 

Where you snag this? also do you have the thread on this handy?

 

Thats a 4runner outlet. They come with a 12v plug normally, but you can swap it out for the dual usb.

https://toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-bezel-power-outlet-socket-8553635020
https://toyotaparts.mcgeorgetoyota....70?c=bT0xJmw9MSZuPVJlY29tbWVuZGVkIFByb2R1Y3Rz
https://toyotaparts.mcgeorgetoyota....c0?c=bT0xJmw9MiZuPVJlY29tbWVuZGVkIFByb2R1Y3Rz

 

These look massive compared to whats on the truck. As soon as the custom leaf packs get here it will all go on. The diff drop kit is here just in case, doubt ill need it, but i figured id rather have it and not need it.
Im only going for a 2 inch lift. Fyi folks, this was about the same as the lift you can get from the dealer price wise. Spc uppers are here too.
No clue why they posted twice. Oh well.

 

Added a dual USB port to my DMM for a cleaner look. It was more work than I initially thought since the USB port wasn't quite as small as I had hoped it would be, but I would say it came out to my liking.

 

Installed the

$259 Voswitch UV100 8 Gang Programmable Switch Panel Power Control System for Truck UTV Side by Side Boat 12V Battery Use

Voswitch UV100. This Unit is very over built and easy to install. Great alternative to the Spod cost wise.

 

That is certainly better than wires dangling in front of the stereo.
I installed a surface mount USB on the right side of my RAM mount connected to battery power always.

 

Nice! I thought about going to the battery but decided to just use power from the cigarette lighter since I don't charge anything with the vehicle off anyway, plus I was lazy to run more wire. Yeah, the dangling cables were annoying and they would tap my screen and change the song/screen all the time.

 

Very nice! Looks Factory.

 

Ceramic tint all around except the front doors are hybrid. Installer said it would match the factory rear tint better and still block heat.. I could tell the truck cooled off faster today and you couldn't feel the heat as much.