Anyone modify rekgen or rokblokz to prevent scrubbing?

Just installed an eibach sport kit, spidertrax 1.25 spacers, and 265/75/16s on my truck. The rekgen flaps I have scrub the inner bolt when I turn full lock in reverse.

Wondering if anyone has had a similar issue and come up with a fix.

Thanks!

 

What are your wheel specs: offset and back spacing?

Have a good alignment shop adjust your caster.

 

Hoping I won't need to.. but I suspect after my CMC they will need to come off (at least the front ones).

 

OEM TRD Off Road wheels

 

I have the 2nd gen TRD Pro suspension on my TRD-OR, which gives it roughly 1.5" lift and 265/75r16 tires. Also running spidertrax 1.25" spacers and RB flaps. Mine has never rubbed on anything. Wonder what is different...lift height maybe?

 

I have rekgen and I replaced the inner bolt with a cap head,

 

Yes, I had to modify the inner bolt on my Rekgens. I simply chopped the rubber spacer they provided in half, which sucked the mudflap and bolt head in deeper when tightened.

 

I thought about this as well. Good idea

 

Mine rubs in the center. Not near the bolt head. Weird.

 

Mine does too, although not that bad. I was wondering if a heat gun and some massaging like the inner fender well would work. They definitely could use some better form fitting.

 

Yeah agreed. I thought about cutting the whole top half off and extending a bracket off my sliders.

 

Ha! That's what my dad mentioned I should look at doing as well. TBH I added the flaps to help with the winter road cinder rash until I got sliders that would hopefully do the job. Got my sliders but haven't taken the flaps off yet to see how the sliders do at blocking stuff.