What Have You Done To Your 3rd Gen Today?

2nd best mod out there...next to paying off the truck lol

 

Cries in lease.

 

Replaced the rear window on my leer and the-installed the camper shell on the truck.
It wasn't too difficult. I removed the window by taking the screws out on either side of the hinge rail and just slid the whole window and frame out. Oh, and first disconnected the struts. Drilled out the rivets holding the bottom of the frame on and it came right out. Reversed the process to install. I used a piece of 1/8" polycarbonate with anti-abrasive coating, and then had it tinted( must use tint made for poly). Added an extra rivet on either side to stiffen it up.
Cost $160.00 and a few hours labor.

Trying to get a replacement glass was next to impossible and the cheapest price I got was almost $700.oo

The moral of the story- Don't break the rear window glass.

 

I looked everywhere and nothing out there so just built my own Minime.

 

I have been drooling over your mini trucks since I first saw them, but the cost is too high for me to go that route. $3 at the goodwill I can handle, $300+ for a mini like yours… just not in my budget at the moment. I will admit, yours do look amazing!

 

FINALLY applied tailgate inserts. Chrome on black is S-E-X-Y. Ties the V6 emblem and taillight together like it should have from the factory. High quality product, super happy.
Chrome-out is the new black-out. Chroming is the new de-chroming.

Auto safety Tailgate Insert Letters for Taco 2016-2021 3D Raised Zinc Alloy Rear Emblem Decals with 3M Adhesive-Chrome Silver

Mugwort Belly Button Patch Auto Safety Metal Tailgate Insert

https://www.amazon.com/dp/B07G2FPWRR?_encoding=UTF8

 

I appreciate that but unfortunately by the time you get chassis, electronics, lights, paint ECT the cost is a lot more than that but I really enjoyed building them over the cold winters just to see if I could do it.

 

I realized that and added a + to the $300, but not quick enough.

 

Just ordered a custom leaf pack from Alcan. Should arrive in 8 to 10 weeks. They are doing well on materials and running on time. There's something to be said for ordering EXACTLY what you need. Had the rear axel weighed today, then sooke on the phone and added in my super pacific camper weight, gear, and all the other crap.

It wil have 2 inches of lift built in.

 

Just grabbed my sliders from @C4 Fabrication and dropped them off at the powder coater. Should be ready for installation later next week

 

From what ive gathered Benefit is a flatter bottom, sliders don't have to drop to go over the exhaust. Cost seems to be between $2-$300.

 

Yes, it has TPMS in the tires... The read-out is in the app.

It's NOT in the instrument cluster for the SR Tacomas.

 

Just had these installed, I love this damn truck.

 

Had my windows tinted all around

 

What brand seat covers are those?

 

Katzkins

 

Gotta love that white on Black color scheme.

 

Dealer installed camper shell today! Only a 6 week wait, shocked the hell outta me since they gave a 12 week lead time.

The Leer stickers had to go though...

 

Just did the ac drain mod. Took a total of 5 minutes. Its easier to tighten your hose clamp from inside the engine bay. I even fished my drain hose from inside the engine bay. I only laid under the truck to cut the hose and zip tie it into place. Super easy thing to do to keep water on the ground and off of your frame

 

Not sure what the hell happened… but was sitting in traffic when I heard a small tap, and then my windshield was cracked. Still perplexed. Truck isn’t even 2 weeks old.