What Have You Done To Your 3rd Gen Today?

AJT Design

 

Put it to work!

 

folks, I really do not mean to hijack a thread, and this is probably against the rules of Tacoma world and for that I am sorry, I just know that the towing forum doesn't get a whole lot of love, I recently added some questions to this post and I am just hoping to get some eyes on it considering this is the weekend AND this trip I'm referencing is all of a sudden like weeks away and I'm in a small panic.

SO until the mods put me in timeout or whatever (again I'm sorry) I'd like to ask friends to check out the questions I asked at the end of this thread please.

https://www.tacomaworld.com/threads...th-a-6x12-uhaul-trailer.724653/#post-26072783

 

Where did You get those vent rings ?

 

Link to the USB charger mod?

 

Towed a culvert.

 

10k mile free dealer service, basically oil chg and tire rotation.
Had to dble look at the spec sheet, they added 12 pints of oil. When did it chg to pints? Lol

 

First post on here so I figured I’d make it count. Have owned my 2019 TRD off-road for 2 years and decided to give it a lift. I went with the Bilstein 5100 front and rear shocks, went to the 5th notch on the front shocks and used the OEM coils. On the back I added a 1” block to level the truck out with a 2/1 lift. I threw some 32” falken wildpeaks on the OEM TRD pro rims and oh boy do they look good. I have since driven the truck over 300 miles and can say I was not expecting the wildpeaks to be that quiet. I also enjoy the stiffer ride, feels more like a truck. Overall I am so pleased with the set-up, don’t know what took me so long to do this…..oh I know….the gas mileage! I drive a lot for work but still managed to get 18-19 hwy and 16-17 city. Beyond worth it now in my opinion. Let me know what ya’ll think! GO BILLS

 

Sorry man. Research. Just like I did. The info is here in the forums, freely available.

 

Cllena Car 12V 24V to 5V 3.1A...

Cllena Car 12V 24V to 5V 3.1A Dual USB Ports Dashboard Mount Charger Blue Light for Toyota (2.1/1.2A-2)

https://www.amazon.com/dp/B01CTOKI06?ref=ppx_pop_mob_ap_share

 

AJT design

 

Sweet.

 

Relocated the CARPLAY USB and wired the existing USB to be a regular charger only because I got tired of seeing the cable all over the center console.



This is what I did to the radio to CARPLAY USB harness. After I took this picture I added a additional female USB adaptor as well in case I need to do any firmware updates in the future. Now my iPhone cable comes out between the console and carpet just below the e-brake since I leave my phone between the e-brake and console it works perfectly for me.

 

How did you wire this?

 

So far I’ve managed 1,300 miles since last Saturday traveling from Pensacola Florida to north of Eaton Ohio. Now we’re in Albany Kentucky and should be in Chattanooga again tomorrow night. On the Worlds Longest Yardsale doing lots of picking now hauling back a 6X12 uhaul about 1/3 full and putting on some weight. Got a slight squat now, managed to strap down 4 vintage doors to the top of the uhaul roof, scored a free extra heavy duty cargo netting so put that to use.

 

This gives me hope. Godspeed.

 

Nice ride! Welcome to the forum .

 

Little behind on keeping this updated.

Over the past few months, I have:

• Installed the tag light DIR by @daveeasa
• Installed Dave's raptor light harness
• Installed the Switch Pro 9100
• Installed Powertray's
  $659 SP9100 Switch Pros SP-9100 8-Switch Panel Power System With Concealed Mounting Hardware
  SP9100 system with dual circuit breakers
• Installed @MESO's custom switchpanel to hold my SP9100
• Installed Baja Designs ditch lights (yes, they ARE compatible with the Redline Tuning Max Lift hood struts!)

Without the tag light DIR:


With the tag light DIR:


SP9100, MESO switchpanel, & ditch light install:

 

The 360 camera is really nice. OK if I add those two photos to the DIR thread?

 

Thanks! And go for it! I meant to do it a while back but I always forget if it's in the 3G section or BST. Lol.