Simple code question

Saw this on the way the brake and abs light come on this morning. Disconnected the batter for 30 min. Just rescaned Cause lights were still on and got this photo. My question.
What the hell causes that?

 

Interesting... my first guess would be a harness connector that's not properly connected. Get a schematic and trace those circuits, see if they share a common connector at any point.

 

I pulled the seats out 2 weeks ago but I don't see how that would cause this not. I appreciate the idea. I will try that

 

Did you delete the codes or just disconnected battery for 30? Hard delete.

 

Some codes need to be strictly cleared with a tool or drive cycles once corrected.

 

I do! Check your passenger seat harnesses VERY carefully; bet that either one is unplugged or has damaged pins.

 

It's both a driver and passenger fault though. That's why I'm most concerned. All plugs are solid

 

The one that catches my eye is the RR Wheel Sensor.

I can’t see why that would be related to the Occupant Safety System?

 

Likely the occupant sensors were tripped by the seat removal and not cleared/pending and the real problem is the wheel sensor.

 

Good catch!

 

I was just gonna say I have codes for both sensor and no speedo now

 

Hmmm... I'm back to thinking wiring. Do you have a DVOM or labscope to check the wheel sensors and verify the supply & signal to them?

 

If your airbag light is not currently on the airbag codes are probably history codes from having the seats out.

 

So I swapped the plugs on the speed sensors after I cleaned them and then swapped them back and the right rear os the constant sp I think it may be the culprit. I appreciate the help. I'll fill ypu in in if o fox it this weekend

 

Seems to be wiring. I'm at a loss