What Have You Done To Your 3rd Gen Today?

Yeah, I'm going to have to do the same thing since my plan is to go with 33"s next time I need tires. Why not just use 5 of the same? As someone just posted, you can fit a 33" spare if you move the hoist backwards a little. Do you want a narrower tire so that you get a little more ground clearance than you would if you had a 285 mounted under the bed? Just curious.

 

My 2018 TRD OR had that cubby. My 2019 TRD OR doesn't. GRRRR!

 

i was thinking that but it wouldnt make sense since my aftermarket wheels are 17x9. Spare is 16x7 maybe? I didnt want to spend $250 on a spare tire that i will barely use. $100-150 would be good i think on a smaller lower end brand tire

 

You may be aware but I would make sure you check the actual tire height if you're buying a different tire of the same size. They can can be listed as the same size and be half an inch different in height.

 

New shoes- KO2's
.
And DYI shovel mount

 

Put gas in it. Don't think I need to mod the gas cap door.

 

Garmin Mini dash cam

$26 Garmin Polarized rear Lens Cover for Dash Cam, (010-12530-18)

polarizing lens - Bought mine from Amazon.

 

you should mod that gas cap door tho!

https://www.instagram.com/p/CO4UbWZHG-m/

 

It's cool. I keep my 4' level, axe, bow saw, blueprints, and recovery crap up there. It's not as solid as i expected. The plastic is one layer that's not quite as thick as I expected. Not as substantial as a pelican case, but it's spacious, the struts are great. It does what I wanted it to do and looks cool in the process.

 

Same here, love mine! Easy to set up and works well right out of the box. Not too expensive either. Get the larger memory card and polarizer filter too, no glare.

 

You guys really don't need resistors to fix the hyperflash....

I have the stage 2, and when you change your front turn signals to the VLED bulbs, you have no hyper flash.

https://www.vleds.com/shop-application/turn-signals-front/7440/7443-50-hv-amber.html

 

if you have the ability to change the front turn signals. I have Morimoto XB headlights and no can do. Plus, anyone with OEM LED Headlights can't change anything either. Now, if you an assembly to change the turn signals, then

 

Took those ugly inspection stickers off my windshield

 

Added an overlay to my front Toyota Emblem - purchased from MY GARAGE LLC (C_mento_taco_808 on IG) for $35 shipped.

 

Does that include 2WD. I have a Sport.

 

Yup! I had that too before I upgraded to my full OEM headlight LED. I even have my total tail stage 1 upgraded to full v6 extreme reds, and v6 Triton white Amber switchbacks. The problem is some Tacoma’s are finicky with this upgrade. Also, the meso ultimate turns takes care of the HF in reverse.

 

Yesterday I received my 270 awning from Dog House Tents. This thing is huge! I had to relocate it today because the forward overhang was hitting my front rack on every small bump in the road. I think it might actually be too big for the Taco and without wanting to mount it to both racks for obvious reasons I don’t know if I’ll be keeping it.

The quality is nice, although I had ordered a passenger side awning and received a driver side (only noticed after first installing it)

 

My first 'big" mod...

 

If you put the gas cap cord through the clip there is no need for it.

 

...it's like Toyota wanted you to do it that way...