Weekend 6112, UCA and ECGS

I am taking on a big job for me this weekend.
Since I have at take a lot a parts out what do you guys think is the best order to remove and replace?
I have an 09 DCSB

Thanks

 

ecgs, 6112 then ucs's.

 

Ecgs, uca then coilover, much easier to change uca with no coilover in the way.

 

Thanks..I got it done... So far everything seems good. Thanks to all the good folks here.. They sure have helped me out.

 

How’s install going?

 

It is... I suck at taking pictures... I am installing 5160's and airbags today.. I cant figure out the correct way the washers and bushings go..

 

What kind of air bags? I am sure I can find a install video or instructions

 

They are RideRite..I should be ok with the install.. Its the placement of the washers I cant figure out on the 5160's.. Is it the steel one first or the silver one first? The other silver one has a lip that I think goes on top of the bushing and under the mounting bracket.

 

Typically the curved edge one goes on top, I believe.

 

But here is a start...
https://www.tacomaworld.com/threads/ride-rite-air-bag-install-trick.381402/

 

Hmmm. Ok also the hole on 2 of them does not allow the washers to slide past the threads

 

That's weird.

 

https://youtu.be/VLBC7aL3urQ

12:14 time on video shows washer stack

 

Ohhh, I had thought you meant it was done. This should help-

 

Which one on the bottom, the steel one or the silver one?

 

Thankss.. The pic in the PDF shows the steel washer on top.

 

Looks like there are
3 washer. The odd one goes in the middle.

 

So far its great. I got all mu parts installed and it seems to handle good. I wish I had done this a long time ago. Toyota replaced my frame over a year ago.