What is this for?

Hey guys, hopefully this hasn’t been asked before but I couldn’t find any answers by searching.

I was in the process of adding a switch for my fog light install. Anyone have any idea what this is meant to be connected to?

 

Can't say on that directly, but on toyotas I've owned in the past, they have had extra plugs for features and buttons that my trim level wasn't optioned with.

Bump, hopefully someone more knowledgeable can chime in.

 

That's the seat ejector wiring which they didn't install because they ran short of chips. My guess anyway

 

Guess if I fly off a cliff I’m screwed

 

If you don't have a cargo light switch, then could be for that. For the OEM bed light kit, you have to buy that switch and a relay. The switch plugs into prewired harness in that same area of the dash.

Or could be for auto highbeam switch, power invertor switch, or clutch start cancel switch

 

It's either for the:

1) Cargo Light Switch.
2) Auto high beam Switch.
3) The front facing camera Switch.

 

Russian listening device.

 

May be the camera switch considering I already have the other two.

 

Inverter switch , I believe?

 

Yup. That’s it.