Rims and tires

Hi team,
I am waiting on my factory order to come in. I am thinking about putting a 33 inch tire on it the day it comes off the lot. I am hoping to put a 10.5 wide tire on it. I have tried to do some research on this but can not seem to figure it out. I am ready to do a CMC, and then will eventually get the lift.

What is the most common 33 size? What is the most common skinny 33? and if I plan to run this will I need aftermarket rims with a negative offset? Can I get away with stock rims and spacers?

Thanks for your time on this matter. I am sorry if these questions are redundant.

 

285/75r16, 285/70r17, 255/85r16, 255/80r17. Stock wheels for skinny's, add spacers for thicc boi's, negative offset wheels for the IG likes and follows.

 

I am afraid to ask…..but what the hell is thicc boi’s ??

Sounds like what you might end up with while pissed drunk and you wonder into the Red Light district in a third world country.

 

Dont forget dressed as girls.

 

https://youtu.be/9GvXWm3u0Gs

 

Thanks mate!
I am not doing it for the gram so I'll just stay stock haha

 

depending upon setup my old wheels were 16x8 et 0 with 285/75r16's and just barely rubbed the mudflap at full stuff. Ended up with some -20's and had to do some trimming, still need to do a little more as it still grabs the front bumper at times in reverse.

 

255/85/16 or 255/80/17. Both are a 33.1" tire

 

So you’re doing it for the gram?
Thanks for your wisdom

 

thinking of doing a shock relocate and want to be able to clear the rear shocks without spacers.