What Have You Done To Your 3rd Gen Today?

I'm out of warranty, is there any further documentation that this is a full recall and free?

 

Reminds me of one of my favorite movies... Grumpier Old Men ("Just as long as you find me...")
https://www.youtube.com/watch?v=61R1xvR_GfE

 

To be honest, I was terrified that I was going to be cinching down the bolts and hear a loud, disturbing 'crunch' as I broke something expensive...but it didn't happen.

I tightened the bolts about 1/8 turn at a time and kept an eye on the rubber seals....once they were compressed down the bolts felt tight, so I just stopped. I had so little room to work that it was easy not reefing down on the nuts.

Near as I can suss out, new fibreglass is far more forgiving than old, and the rubber seals take up the slack nicely.

The mounts are rock solid, they still aren't leaking, and nothing cracked or crushed or broke...so it IS possible if you you curb your enthusiasm with the wrench

 

It’s the small things… though i did have to find out the hard way that patches don’t just stick on to the headliner. Pardon the absolute state of my front end, could wash it every day and it’d still look like this

 

https://www.tacomaworld.com/threads/yes-another-leaking-third-brake-light-thread.558122/page-7
https://www.toyoheadquarters.com/th...eak-limited-service-campaign-lsc-21td03.2280/

 

Awesome thanks. The more I look into this the worse I feel about it. I just know I'm going to be one of the two week guys. My cab smells awful, and all of the sudden my screen is messed up. (may or may not be related, but it started at the same time)

 

I’ll post a video it’s pretty easy.

 

Got a new sticker and patch for the rig

 

Good ole Red Green, sage of the North.

 

Have you tried using an ozone generator for the smell?

 

I haven't been driving it. I'm sure there's bad stuff throughout the cabin

 

now you just gotta cover it with patches!

 

That's sweet hell I think my techs are trainees Like the 3 stooges LOL

 

I went down to my local topper/camper shell/ cap dealer, to place an order for a leer/are cap. Drove away with this instead


Thanks to seashells in Grover beach

 

3TPAM installed, now for positioning and proper USB cables.

 

Hopefully these will go better with the Kings than the current 20" TE37X.

 

Replaced stock (damaged) plactic covered bumper with all metal from .

 

Those are the diamond dark gunmetal finish?

 

Installed Roadmaster baseplate, step one to being able to tow it 4 down. DS disconnect on its way, disabling steering lock still being pursued.

 

For front end Friday, new TSS sensor overlay from IG: c_mento_taco_808.