What Have You Done To Your 3rd Gen Today?

Installed a bed rug, and made my own bed track nuts to mount my camping propane tank.

 

Nice! I just drove out to Vegas a few weeks ago and picked up a new Mt. Rainier hybrid and a matching hybrid awning.. Such a good group of people there at CVT.

 

Put my labor day sale diode dynamics SS3 pro fogs in. Ended up taking the fender liner off on the first side then just did the second through the hood opening, prettt straight forward. Will have to see how I like where they’re aimed and potentially adjust more after some driving. Seem like they’re pretty high quality and they’re awefully bright!

 

Installed a pair of BD S2 Pro on CaliRaised low-profile brackets.

 

Changed out the radio dials into some black anodized ones. Recently saw AJT designs are taking pre orders for knobs that will match their chrome delete package (which I have) so Im very excited to get those. Waiting on Monday to get all my LEDs so I can FINALLY switch out my whole tailight unit

 

This happened yesterday. It goes with Saturday's post. It ended up being a little late, so I didn't make the 'Today' deadline.

I finished the front. I'll need to measure once it settles. It should be about an extra inch and a half over the one inch on the Pro. So that's two and a half inches for the peasants.

 

So I decided to see if I could reduce the amount of road noise coming into the truck. I did the Noico butyl and second skin sound mass loaded vinyl with the closed cell foam. Quite a reduction in noise. Happy with the results

 

impressive work!

 

4runner trd pro

 

Want to do this so bad, but its an intimidating undertaking. Any tips?

 

There is an amazing YouTube by Jesse Rizo https://m.youtube.com/watch?v=ipJaa5TkuvI

it is step by step instructions. I just upgraded the insulation I used on the floor of the truck to second skin MLV with closed cell foam from his video. TBH it is a tight fit with the upgraded floor padding.

 

Spent Saturday at the dunes in Sand Lake, OR. Turned out to be a beautiful day even though the forecast called for rain. My SR5 handled it like a champ.

 

All I did was remove the grille and straight forward install. So far I have not been flashed by oncoming traffic. Great coverage too.

 

Does filling her up with her first full tank count? I’ve had her for about a week now.

 

Fairly expensive mod. Cost me $50 this morning.

 

Amateur . Mine was $87 a couple days ago.

 

Exactly the same for me yesterday

 

$50!?!? I’m at $75. Hurts every time. Ahh California

 

I have been at around $40...ahhhhh Ohio!

 

I installed two 6.5" kicker marine speakers in the bedside. Added a 2 channel Kicker amp to the bed side molle panels. Just redid my bed power setup, everything runs off the second battery. Cascadia 4x4 solar panel on the hood can keep up with the stereo during daylight. Pull into camp, pull out the iPad, crank the tunes. Crack a beer. Thats my camp setup routine now

https://youtu.be/Y7u8Kj5xMsg