Wisconsin Tacomas and bad financial advice

A 4 pack was $157.60 tax/shipped! (Free shipping)
$39.40 ea.!!!!

I think I will only use 1/2 Gallon on each but I might end up using 1.5 - 2 gal. Total.

Good call on the spray cans.$10 @ Home Depot.

I’ll see how the application goes and decide on woolwax for next time! Lol



Disposable suits are also on my shopping list


I told the wife she should learn how to remove the spare tire and oil the chain.

 

nice! I will for sure keep Halloween weekend open!

 

I need to find out if our city is having trick or treating on Halloween or the week before. Either way I think it starts at 4-5pm

 

@BookieBob 1/2 gallon each will be pretty thick. If anyone works on your vehicles, they will hate you

And probably tell you that everything on your truck is broken and leaking fluid

 

Yeah.. i did 2 vehicles with a quart of woolwax.. more than enough for me.

I could see doing it thicker the first time plus inside doors and stuff, but you dont need to go crazy.

 

Yeah the 3m rustproofing I used back in the day only took 1qt maybe 1.5qts and did doors.

I planned on the doors. Just wasn’t sure how easy it was to apply and how thick it will be. The 1st 45 seconds when I have the pressure too low! I’ll know!!’
Lol



thanks !!!

 

Fact! The Dealer replaced both rear shocks and a front strut on mine because they were "leaking" when I complained about the rear springs squeaking and asked about the TSB.

For the record the springs stopped squeaking after I cleaned them ahead of the new shocks being put on.

 

I echo the Woolwax preference - thicker, less odor, and it's black in color

 

I would figure a bit closer to a gallon for the first time just getting into all the nooks and crannies.

I think I used 6-7 spray cans when I first did mine. Not really the economical way to do it.

I ordered a spray gun with 2 nozzles:

$45 TCP Global Air Rust Proofing and Undercoating Gun with Gauge & Suction Feed Cup, 2 Wands - 22" Long Flexible Extension Wand with Multi-Directional Nozzle - Spray Truck Bed Liner, Rubberized Undercoat

https://www.amazon.com/TCP-Global-P...1632349520&sprefix=fluid+film+,aps,192&sr=8-8

 

Hell yes!

I need to pick up some beers next week for the 9th!

 

I told the wife she should learn how to remove the spare tire and oil the chain.[/QUOTE]



DO NOT oil the chain for the spare!!!

 

Driveway Beer Friday after 4pm if anyone is in the neighborhood!


Got plenty of
•Miller Lite
•Pabst
•Bush light Apple
•Miscellaneous Missouri beers
•Apple pie Moonshine

 

I lower mine every year and usually spray it with lithium grease. I had a work truck that wouldn’t break loose in Montana in 2010 and couldn’t get the tire down. 9 hours on the side of the road and it’ll never happen again!

Did it on my 2015 & 2017 Tacomas

 

DO NOT oil the chain for the spare!!![/QUOTE]

I'm assuming because oil on the tire will cause it to degrade?

I lowered my spare and coated the chain and mechanism when I sprayed the underbody for exactly that reason. I highly suggest lowering the spare and pulling out the factory jack at least once a year to verify all is in order.

 

https://youtu.be/op-BBwAShsM

Someone needs to sent Ronny Dahl a silky saw to review.

@BookieBob he likes his coffee slow heated over a fire as well.

 

ha!

I love my Coleman grill taking 20 minutes for ☕️!

I also love the Coleman griddle.



Probably not as awesome as cold water in biscuits and gravy dehydrated meals in the morning but…..

 

I'll bet the cold biscuits and gravy were still better than the eggs!

 

i have 2 bags of the eggs in my camping bin that I bought on that trip! I’ll probably never eat them.

Lol

 

I'm assuming because oil on the tire will cause it to degrade?


When lubing the chain and mec. always use a dry lube like graphite, you don't want anything on there that can attract dust and fine particles that will bind the winch up over time.

I figured this out the hard way.

Pro tip: turn the tire over so the valve stem is pointed down to check psi easily.

 

… where do you think I learned about the silky saw.

from Ronny Dahl lmao