What Have You Done To Your 3rd Gen Today?

https://www.amazon.com/gp/aw/d/B08R7BJ1F6?ref=ppx_pop_mob_b_asin_title

 

6'-1"

 

I think that link is to your order, not the part. Just post your username and password and I’ll check it out.

 

Im having trouble finding it


NVM

$207 HPS Performance Black Silicone Air Intake Hose Kit Post MAF Tube Compatible for 2016-2022 Toyota Tacoma 3.5L V6, 57-1600-BLK

https://www.amazon.com/HPS-57-1600-BLK-Black-Silicone-Intake/dp/B07QYSWYZT

 

It didn't take them long to knock off that item!
However, the threads are steel on the real McCoy. These look to be threaded into the aluminum.

 

Don’t pull so hard next time

 

Oops! I edited the link. Thanks.

 

HPS Tacoma for the search:


HPS 57-1600-RED Red Silicone Air Intake Hose Kit Post MAF Tube, 1 Pack https://www.amazon.com/dp/B078H83RR5

 

Did a lot over the past several days. All-Pro P/N 3510-AP gussets welded:



Risked cancer and reproductive harm to put in Wheeler's 1/4" bumpstop extensions P/N WOR-308067.



Remaining parts installed:

• StopTech 4Runner slotted rotors P/Ns 126.44174SL, 126.44174SR
• Advics P/N AD0976 OEM-equivalent pads
• PowerStop P/N S6278 reman 4Runner calipers
• OEM 4Runner brake dust shields 4778160140, 4778260140
• OEM replacement LCAs 4806804060, 4806904060

Noticed the truck pulling to the right on the test drive. Doing a fishing line toe adjustment before hitting the trails tomorrow. Sure enough, both tires were 3mm or about 0.4 deg to the right. Interestingly, with my cam bolt settings, the front track is a good 1.25" narrower than the rear track.

 

Thanks

 

SS3 pros

 

Got @602runner bed tie downs today! These things are beef!!

 

i bought an ect pwr extension harness here:

https://kabowest.com

and moved the ect pwr switch to the left of the steering wheel, in case you're wanting to move this one too. not sure if they sell other harnesses for bsm, park assist & qi charger.

 

what have I done to my 3rd gen today?? Low speed rear end collision...

In case you were wondering, I was the one rear ended. Everyone was ok and no one hurt and both cars drive-able with slight unsightly battle damage. It was an annoyance at best for both of us. Thank goodness.

My Old Man bed step took the worst of it and sacrificed itself to save the rest of the truck by breaking off at the connection...

Bummer, cause I really liked the bed step. Hopefully I can get another one as soon as it is fixed along with the bumper cap.

I am just glad I do not have to go car shopping and it can be fixed.

 

Happening tomorrow... Dont like the red on the oem one.

 

I hear it adds 5 horsepower ...

 

Nah, they appear to be identical...but for quite a bit less $$

 

@MESO bd4 with nmo mount
2 center @Baja Designs lights are red
2 outer bd lights are white
rugged radio nmo antenna connected to a rugged radios M1 race radio

 

Swapped my 2019 OR grill for a 2020. No Chrome. Threw on a old Teq logo too

 

You called the guy a professional twice. You had a "specific discussion about what you wanted".
He didn't do it how you wanted and he can't weld so the entire reroute was indeed "poor workmanship" not professional!

Dude you had custom work done that you are paying good $$ for, next time be that dick and make sure its done right and to your liking! It'll save you from finding out a month later that the guy is a hack.