What Have You Done To Your 3rd Gen Today?

HPS Tacoma for the search:


HPS 57-1600-RED Red Silicone Air Intake Hose Kit Post MAF Tube, 1 Pack https://www.amazon.com/dp/B078H83RR5

 

Did a lot over the past several days. All-Pro P/N 3510-AP gussets welded:



Risked cancer and reproductive harm to put in Wheeler's 1/4" bumpstop extensions P/N WOR-308067.



Remaining parts installed:

• StopTech 4Runner slotted rotors P/Ns 126.44174SL, 126.44174SR
• Advics P/N AD0976 OEM-equivalent pads
• PowerStop P/N S6278 reman 4Runner calipers
• OEM 4Runner brake dust shields 4778160140, 4778260140
• OEM replacement LCAs 4806804060, 4806904060

Noticed the truck pulling to the right on the test drive. Doing a fishing line toe adjustment before hitting the trails tomorrow. Sure enough, both tires were 3mm or about 0.4 deg to the right. Interestingly, with my cam bolt settings, the front track is a good 1.25" narrower than the rear track.

 

Thanks

 

SS3 pros

 

Got @602runner bed tie downs today! These things are beef!!

 

i bought an ect pwr extension harness here:

https://kabowest.com

and moved the ect pwr switch to the left of the steering wheel, in case you're wanting to move this one too. not sure if they sell other harnesses for bsm, park assist & qi charger.

 

what have I done to my 3rd gen today?? Low speed rear end collision...

In case you were wondering, I was the one rear ended. Everyone was ok and no one hurt and both cars drive-able with slight unsightly battle damage. It was an annoyance at best for both of us. Thank goodness.

My Old Man bed step took the worst of it and sacrificed itself to save the rest of the truck by breaking off at the connection...

Bummer, cause I really liked the bed step. Hopefully I can get another one as soon as it is fixed along with the bumper cap.

I am just glad I do not have to go car shopping and it can be fixed.

 

Happening tomorrow... Dont like the red on the oem one.

 

I hear it adds 5 horsepower ...

 

Nah, they appear to be identical...but for quite a bit less $$

 

@MESO bd4 with nmo mount
2 center @Baja Designs lights are red
2 outer bd lights are white
rugged radio nmo antenna connected to a rugged radios M1 race radio

 

Swapped my 2019 OR grill for a 2020. No Chrome. Threw on a old Teq logo too

 

You called the guy a professional twice. You had a "specific discussion about what you wanted".
He didn't do it how you wanted and he can't weld so the entire reroute was indeed "poor workmanship" not professional!

Dude you had custom work done that you are paying good $$ for, next time be that dick and make sure its done right and to your liking! It'll save you from finding out a month later that the guy is a hack.

 

Nice!! Been looking at these, let us know what you think

 

I also angled and welded my upper bed bar to my lower bed bar for better access to the center section. Its in preparation for the pro eagle jack which will be mounted in the center.

 

Things I did today. Washed, clay bar, Chemical Guys VSS, Chemical Guys Ceramic wax. 303 on the softtopper , and some zipper cleaner/lubricant. Added a tailgate seal and some weather stripping around the softopper bars.

I missed a few spots for sealing the tailgate so I gotta figure those out and then maybe the dust will be down.

 

$10 INIU [60W Total] 5A QC 3.0 PD Fast Charge Car Charger Adapter, All-Metal Mini Dual Ports [USB C+USB A] USB C Car Charger for iPhone 13 Pro Max iPad Samsung S21 MacBook Airpods Tablets etc

Car Charger, INIU 2-Port Total 60W QC 3.0 5A PD Fast Charge USB C Car Charger, All-Metal Mini [USB C + USB A] Car Adapter for iPhone 12 11 Pro XR X 8 iPad Samsung S21 S10 MacBook Airpods Google etc. : Amazon.ca: Electronics

 

See, I appreciate this response a lot, thank you.

Well it’s a metal fabrication and exhaust company that was recommended by our local 4 Wheel Parts branch. But yah, obviously no accounting for taste. I got an appointment for Monday so we’ll see what they say. I’ll be sure to tag you

 

The two points to bring up that are the shop's fault:
1. Pipe is too close to the plastic case.
2. Leaking

The shop can use a prefab 2-to-1 collector to move the crossover pipe back for a clean install:

 

Upgraded to roof on my dog carrier. The Plywood just was a bad idea! LMAO!