Show your 285/75/16 and 285/70/17

285/75r16 Wescott Lift OEM TRD Pro wheels.

 

See pictures I just posted. so I was worried about that too, with the wildpeak 285s I only Rub on plastic at full turn but it's not bad. Will fix with a couple inches of lift. It's close to the UCA but definitely over 1.5in away. I have stock lift at the moment

 

i got 285’s BFGs on SCS sr8 -10 wheels on Ironman 4x4 lift but i have it 2” front 2.5” rear. stock UCA. i had to do a CMC with some extra lower fender cutting. and a bit of front bumber cutting.

 

285/70/r17
2.5"(ish) lift in front. Like 3" in the back
Some small plastic trimming needed along with a cmc to stop the rubbing.

 

Falken WildPeaks AT3W 285/75/16 with about 2 inches lift and 1 1/2 inch spacers. Front mud flaps removed, no rubbing, but very close...

 

What lift you got there? Still trying to decide. I have a 3/2 spacer lift but debating returning it for suspension. I have same size with a 0 offset wheel and rubs a little bit on the rear front fender well

 

Bought the truck used and the details of the lift are not available, but I snapped this shot and measured about 23 inches from hub to fender.
Those are my old winter tires in the picture 265/70/16.
I had to remove the mud flaps to get rid of the rubbing when I put the WildPeaks on.
Maybe this crowd can tell me more...

 

Those are the stock Bilstein 4600s looks like with a spacer lift. Maybe 2" or so

 

285/70/17

 

Can I ask what offset your wheels are and what lift you have? I really like this look. And is there any rubbing issues. Thanks

 

What lift and uca's are you running? Thanks

 

What offset and lift by chance?

 

Dobinson IMS heavy springs 352 I believe and JBA standard UCAs with 3 degrees built in.

 

Is it stock shocks etc or suspension lift? Sorry new to this. Thanks

 

20 Pro w/ Wescott Pro kit + 285 75 16 KO2s. No rubbing with OEM mud flaps.

Has anyone ran a wheel spacer to give the tire a little poke past the fender? I had 265 75 16 KO2 with 1.5 inch wheel spacers at stock height. Looked killer - loved the stance. Rubbed a bit on the mud flaps, which I trimmed a bit to resolve. Hoping to run something similar.

 

285/70/17, Icon 2.5s, I rub on the first fender trim, and once in a while on the cmc. Need to trim and chop soon.

 

I have the OME 3” lift kit with the medium spring (can’t remember the lbs). The wheels are SCS SR8 17”x8.5” 4.30” BS -10MM offset

the tires are 285/70/17 Goodyear MTR w/Kevlar

they rub bad some times. I have trimmed a lot on the front fenders and it still rubs from time to time if I am off camber or have passengers. I occasionally catch the cab mount but it is rare. When I originally did all the trimming, it didn’t rub. After about 1.5 years and 20,000 miles, the springs have settled causing the rub issues to return

 

my brother in law has the same lift, with different wheels and tires and his does not rub as bad as mine. His tires are slightly shorter which seems to help. I have attached picture of his truck.