How to install three wire hardwire kit?

I bought a dashcam that came with it's hardwire kit
But this has three wires(ACC, BATT, and GND)
I check installation video for tacoma but they all use two wire kits
Where does the ACC(Red) and BATT(yellow) wire go?

 

Usually you don’t want power all the time to the dash can because it drains the battery so you put the one on the battery, one to a fuse in the fuse box that’s only on when the truck is on, and one to ground. I think that’s how it works, that’s how I wired up my accessory lights.

 

I understand but I would like to use the parking mod just in case something happens to my truck while it's off
Also it's a dashcam so it wouldn't drain that much unless I leave my truck off for weeks

 

What brand? What did the brand's instructions say?

 

I wired my dashcam to my rearview mirror using a $12 adapter on Amazon. All you'll need to do is buy a small micro HDMI to USB, adapter, and a micro SD card

Here is my dashcam setup. It also includes the link to the adapter
https://www.tacomaworld.com/threads...d-thread-north-carolina.694657/#post-25344445

 

It's a C200 4k toguard front and rear dual dashcam