What Have You Done To Your 3rd Gen Today?

Ditch lights installed

 

Hell ya!

 

Re-adjust my Smartcap

 

Upgraded to dual color map lights from MESO Customs and purchased through Bustabeatgeorge.

 

So they still make a 4x2 version with a rear locker which sounds like what he has. Just dropped the name. I have not noticed any around but then again, they might just look like a 4x4 OR and be hard to tell the difference on the road. All I see is the 4x4 types or the occasional 2WD.
I thought the "PreRunner" was a good idea for the right buyer.

 

That was my issue as well. Had to fix it.

 

I went same way here. From jumper cables to NOCO Genius booster. Have a chance to use it last winter during cold snap, at -25c, on co-worker's older Pathfinder. Battery was completely drained,
so at Noco booster I have to push and hold manual override button. Engine starts right away, booster shows more than 75% charge left. I start believe commercial in this case, they saying it can start
25 dead battery engines.

 

That is weird. My truck is just at a year old, and it’s from Texas, the atrac switch is up top on that console.

 

Still deciding if I like this.

 

it’s just like Tacoma Barbie!!

1. Pro grill
2. Konig Countersteers in bronze
3. Cooper Rugged Trek 285/70/17
4. Leitner Forged ACS
5. Roofnest Falcon
6. Icon 2.5 stage 3 suspension

 

Nice roof rack. Im looking for OEM rack

 

Tomorrow is install day going to be fun!

 

good lord!

 

Went up to the Four Peaks Mountains. Did pretty good for a 4x2.

 

I see it now. Under the truck and his next socket

Photo of the year.

 

Been pretty busy over the past 2 days. I installed Rav4 radio knobs, an N2 Designs remote start kit, Meso V5 mirror turn signals, and I got my new Clazzio leather seat covers installed on the rear seats (not the headrests yet).

The V5s were hooked up to the DRL from the headlights, so the bright/dim functions mirror the headlight functionality. I already have V2 puddle pods, and I "converted" the ignition circuit within that harness to a DRL circuit, so that they illuminate bright or dim based on the headlight switch position, rather than being bright every time the ignition is on and then dim once the parking lights are turned on. My old Meso turn signals were going to get posted for sale here on the forum, but there has been a ton of them for sale on here already after the V5s got released. So I installed them on my wife's 2021 Highlander, and they fit/function perfectly. Despite the fact that the new Highlander uses the exact same lights as the Tacoma, the process of swapping them out was a HUGE pain in the ass vs. doing it on the Tacoma. The entire mirror needs to come apart (including removing the reflective glass portion), because the screws that secure the plastic piece that holds the light are inserted from the glass side instead of the back side.

For the Clazzios, I did the "under the plastic" method for the rear seats. I found it was much easier to re-install the seat-back plastics back over the leather covers if I used a "T" shape for the cuts instead of simply cutting slits. Next up is the headrests and then the front seats, along with the Clazzio headed seat kit that I need to wire up and install.

 

There's always that. I can remember as a kid, dad and mom would load us up and drive through the Delta to see my dad's family. And my mom would get so sick because of the pesticides on the cotton.

Even to this day, she still gets sick in the late summer. She don't live near cotton fields anymore, but can still smell it in the breeze.

 

Is the bedrack also Martin?

 

Dash Cam Upgrade. Promido tripple cam install.

https://youtu.be/s-8I787vFBw

 

You must be single.