AR-15 BS Thread

lol I doubt you’d have that problem now

 

Freedom Ordnance FX9 takes Glock mags and Swampfox Blade 1x24 prism optic. It’s a blast and with the 8” Barrell pretty accurate. I upgraded from the KAK brace to the SBA3

 

I love my Banshee 300 MkGs but now that Aero has their parts out I would probably build one. I'm running a Holosun 507c on a Scalarworks riser and an Octane 45. I do wish it had a tad more rail space and eventually I'll get a shorter can for it.

 

final piece for the m4a1 arrived, pinned and welded it today



brett over at driven arms co sent over a edit of my pistol as well, good guy to deal with - he has some nice grips, stops, and some mlok accessories he makes on his site.

 

Rookie numbers

 

Do it! PSA ar9 uses Glock mags. My favorite one to take to the range.

 

Go ahead. I did

 

As I am sitting here looking at CZ Scorpions

 

Never looked into those......and off to Google I go

 

Because I did not have a glock mag lower.

 

Those look really sharp. The lowers look very much like the M4E1 enhanced lowers. They might be put on the list I’m still looking at the Aero AR10 build kits it may be a winter order

 

Any of you guy's own a TRS-26I just bought a TRS-25 but I need one more red dot for a finished AR

 

morning advid hunter and shooter since i was a kid.I dont know alot about the AR platform though.
So a question. have flip up open sights and a Votex red dot. open sights will co witness in the lower 3rd of the red dot. if i put 1/2 inch risers on the open sight to get back to the center of red dot is this a decent way. dont want to lower red dot as it pulls me down on the stock into an uncomfortable possion. any sugestions would be nice. was lining up red dot at 50yds in the pic

 

Fun day at range! Shot some standing up for a change…..

 

Without the specifics on your vortex red dot & mount.
You are going to have to do some research/googling "AR15 absolute cowitness height" Or "Vortex red dot cowitnes"
And see if the vortex website has some specs.
https://vortexoptics.com/blog/everything-you-ever-wanted-to-know-about-co-witnessing-part-one.html
"Note* Vortex® no longer sells any red dot optics with an absolute co-witness mount out of the box."
https://vortexoptics.com/sport-cantilever-30-mm-ring-absolute-co-witness.html

LaRue website has some good info for Aimpoints that will give you some good perspective on the topic. See photo at the top and then the descriptions are at the bottom.
https://www.larue.com/products/aimpoint-micro-t-2-2moa-m4-qd-mount-combo/

Good Luck

 

Just need the Elftmann safety and trigger. Typical Aero fit/finish, so I couldn't be happier.

 

thanks for the info sites.i believe this will guide me in the right direction

 

I don’t think there’s anything wrong with a lower third cowitness either if you’re happy with it