Tractors, Mowers, Chippers, Trailers, Chainsaws, Generators, Boat Engines, Flood Control, & Census.

No. Prolly should have. I'll keep an eye on it...until I sell the machine.

 

It will probably be fine. Nice work!

 

The 17 Hp Courage single on my CC ZT has gone through at least 5 mufflers in 15 years. I repaired the original muffler a several times, might have swapped it with one from the parts machine, don't remember. Finally I welded up an adapter to use the 3/4" thread on muffler (like below), after a few years they fall apart -- suddenly. Mowin' along, singin' a song and the thing starts sounding like a helicopter. Fortunately they are cheap.

 

Hen Haus Trailer is almost done.
Need to add external nest boxes, and few other items. Chicks/Hens have been in it last few days and I sure they enjoy the extra room vs being in a water trough in my garage.



https://youtu.be/a5rYvewQN0Y
Like & Subscribe, Guarantee to waste 90 min of day for free. Chicks 1st day to wake up in the mobile coop and use gravity feed bucket.
About 40min into they learn there's feed in bucket and 105min I change the camera view.

 

Hhahahahahaha that's great!

 

Tug of war. Who do you have your money on?

 

I’ve done this dozens of times so I’m teaching someone else how.
@Sandman614

 

I just had pull my air driven lift table hydro pump apart.

Had to adjust the relief valve. The cracking pressure was set to low.

Only thing I can think is the vibration backed off the screw.

Cleaned the oil pick up screen and loaded it with new hydro oil.

 

Clearing a path down the holler behind my house so I can blow and push leaves down it. I put in a double gate last year for this. 3240 is on the clock.

 

Got my path cleared and set up a mount to use my plow on my loader bucket. The spring trip feature will come in handy when I hit stumps pushing leaves. I may put a stall mat rubber edge on it.

 

Next challenge:

Rotory broom to push leaves.

Go!

 

This craptastic thing was bothering me. Previous owner fabbed up a battery box.

Toro kind of dropped the ball on these G3 ZTs. The original battery boxes were not very well engineered. They seem to break pretty often.

I got rid of the nasty, home made battery box and made my own, not so nasty, battery box.
Still need to drill the holes for the battery hold down.

 

Not sure why duplicate pic.

I might post the complete project over in the welding thread if any interest.

 

Reminds me. I was going to add a pic of my dirty flux-core welds in my post on the plow hitch. Just plain dirty.

 

Those welds look spectacular! You have nothing to be ashamed of.

 

Sarcasm is hard to convey in text.

 

No sarcasm. Those are nice.

Flux core is not my favorite to weld with. I moved to MIG along time ago. I remember the hot BBs quite clearly.

 

I actually meant my sarcasm. When I get ready to paint I knock off the BBs with my air hammer and chisel.

 

In case I end up with another rooster.

Zoom in.

 

I could have used that at my old job!