FEND-X Tacoma Wheel Liners

Currently working on an exclusive clothing line. At the moment, only our shop T's are sporting our logo.

Temporarily suspended all fiberglass configurations. Currently undergoing a redesign

 

Thread Revival

Good morning 3rd Gen Fam,

I’’ve been laser focused in the shop and almost completely knocked out the FEND-X backlog. Inventory slots are now heavily regulated, in effort to assure quicker turnaround times as well as improving / providing an overall better customer experience during the order process. Stoked to share some other changes being implemented within the business, stay tuned!


IG- @geartechcustoms

 

Will fend x make a full set for the rear wheel wells as well?

 

Fend-X Rears are ready and can be ordered on the shop site to make a full set. The Rears are designed to work with bed-frame gap guards and overall protects /blocks /seals /looks waaaaaaay better than stock liners.

https://geartechcustoms.com/shop/ols/products/fend-x-rear-liners

The bed-frame gap guards are designed around the rear suspension and interchangeable (can be swapped out to work with different Rear suspension configurations). No drilling into the bed or frame required. Great name btw

Stock Liners





Fend-X Rears

 

So, can you explain to me the difference between the FEND-X and the PROTEC?
It also shows that the FEND-X stuff is out of stock at the moment, so it can't be ordered.

 

Cody will this work for chopped fenders in the rear?

 

Hey Brandon

PROTEC is the product line for the one-piece Splash Guards (these are designed to route up and over the Shock tower and mount vertically against the Engine bay)


FEND-X is the product line for the wheel liners (these are the complete Liners designed to follow the symmetry of the wheel wells all the way up and around)


Yes, the site shows out of stock for now. I’m currently not taking any new orders until my outstanding orders are complete. I’m close. At least a week out from taking any new FEND-X orders. My goal, at that time it’ll be a much more enjoyable and seamless process all-around. Quicker turnaround times etc.

I’ll keep the thread updated. Shoot me a DM if you have any questions

Yoooo Adrian, short answer is yes. The FEND-X Rears are designed to fasten to the hanger brackets that attach to the OEM Bedsides. Most cut Bedsides are cut beyond where those brackets attach or people Fab a new hanger brackets.. with that said, the FEND-X Rears for Trimmed Bedsides will be wide /long enough to reach the new width /height of the Trimmed edge. As for how to attach FEND-X Rears with Chopped bedsides, unless you reincorporate new Tabs in the bedside cut, you’ll have to attach L-brackets along the inside of the Fender cut (ultimately concealed by the Flare).

 

Unrelated, but how are you liking those tires?

 

Subbed waiting for new stock. This is exactly what I need, fiberglass fenders + LT + my diy tube bumper is leading to ALOT of mud stuck up in the body

 

Not my tires/truck bud, can’t give you my honest opinion on that.

Fiberglass Fender design

 

Oh wow, how soon could I get my hands on those? Rear too?

 

Right now it’s backordered on the site and would be approx 5 weeks before it ships. Large batch of orders going out this and next week.

 

Subd What’s the current lead time for fronts with all stock setup option? I am running 255/80/17 Nitto Ridge grapplers and 6112/5125 lift with icon 3 leaf AAL but no bumper and nothing is chopped. Thanks

 

I had no idea you finally released the rear liners!!

These work for a 2nd Gen?

 

Hey man, running 3-week lead on stock configurations. I now have the capabilities / offer the option to expedite orders -within 5-7 business days. Depending on how quick you need them.

Yes sir!! 2nd Gen Rears are ready to go

 

Do you make fenders for 3rd gen Tacoma with trimmed fenders? I’m looking to trim my fenders soon but wanted to keep a set of fenders

 

Hey Brad are you asking about the Fenders or the Liners?

 

Damn I need the whole set

 

I meant the liners. I’m sorry, gonna cut my fenders here soon. Was looking to see if you made liners for that. I don’t think I could reuse my factory liners after I cut.

 

This photo is for reference, I’m gonna cut and I know the tabs for the factory will be gone and then hammer my pinch welds.