Dual switch setup (-) tied to light stalk

Using the available rheostat T harness and combination switch harness, a dual switch can be added to have added lights to function with their respective taps.
Rheostat T harness provides added dual switch illumination and ground tap.
Combination Switch T harness provides taps to DRL (if available), Parking, Low Beam, High Beam, (for HIGH beam FLASH-diode required), Left & RIGHT TURN (for Curb Lamps)
Dual switch in this set up provides OFF, "AUTO" and ON (anytime)
"AUTO" is in parallel with tapped circuit, combination switch selects a circuit the added tap parallels the added circuit.
Diode is required to isolate the tapped circuit.(when dual switch left in "AUTO" and ON is selected the tapped circuit is NOT "activated" also).



@kmorgan3
@Puppypunter