Replaced Carrier bearing drive shaft warm

We have a 96 Toyota Tacoma just replace the Carrier bearing. Drive shaft on one side next to Carrier bearing is getting warm how in warm how do we align the drive shaft and could this be the cause

 

There is a pattern cleanliness vs dirt where your drive shaft parts came a part. You can use that as a clue to put it back together.

 

iv suggested b e f o r e DISassembly

spray paint 1 side A L L componets red

opposite side blue

maybe a 3rd side......white

not a lot o paint................spots the size o a dime

a brush is ok if & happen to have some krylon or vht sitting around

red goes back to red

blue to blue

 

Thank you for the input we missed marking one end and that is the end that's getting warm. We are on our 3rd Carrier bearing.

 

Welcome to TacomaWorld
This shows correct assembly of driveshaft. If it still gets warm turn the slip yolk 180° .
Is there play in Ujoints?
Have you greased all driveshaft zerks?

 

Welcome to TW!