Largest tire size for 17” wheel on stock 2014 Limited DCLB 4x4?

So I have always hated the chrome rims on my 2014 Limited, DCLB 4x4. They are 18” wheels. I want to move to 17” TRD pro matte gun metal wheels. What is the largest tire size I can put on the 17” without rubbing. My truck is stock setup right now.

 

https://lmgtfy.app/?q=biggest+tire+on+tacoma+without+rubbing

 

Thanks … great info

 

Likely a 265/70

 

Which dimension are you considering when you say large? Diameter, which gives actual 'lift', or tread width, which many folks gaga over, but may not actually get value from?

A 255 80 17 will fit those OE wheels and be 33" diameter, no rub, trim, or cut. Makes a nice full wheel well on the OE suspension, if you like that look.

 

Can anyone confirm this works in a 2014 ?

 

Diameter

 

Anyone with stock suspension with 255/80/17? Trying to get an idea of what it looks like

 

Good idea. I forgot where I was.

But since 2nd and 3rd gens have quite similar frames and interchangeable suspensions, I wouldn't be surprised.

 

Possibly the most asked question on this forum, answered thousands of times, can easily be searched.

https://www.tacomaworld.com/threads/largest-tacoma-tire-sizes-on-stock-suspension.67550/

 

It might rub, might not. Depends on your specific truck and what tire you choose. I have TRD Pro wheels on 255/80r17 Nitto Ridge Grapplers with a 2" lift and it rubbed very slightly - removed the mini mudflap, the front mudflaps, and trimmed a tiny bit of the fender. Since then, no rubbing on or offroad.

 

Apologies. I did the key word search and couldn’t find the link, though I know I’d seen it before. Thank you

 

Anyone running these

 

When I compare the 17” to the 18” it doesn’t seem that I am loosing any height. Am I reading that right?

 

Looks like going from 18” to 17” I drop .53” in height but get more side wall on the 17”.