2015 Taco Passenger Turn Signal and DRL not working

Hey guys, I recently noticed that my passenger side turn signal was out but everything else was fine, so I replaced the bulb in the signal but it didn't help. Today I checked my DRLs and noticed that the passenger side is no longer working now too. I checked the fuses and they are fine, the bulbs are new...anyone have any experience with a similar issue? I'm assuming it's relay related, but before I get too carried away going through all that I figured I'd reach out on here and see if anyone has other suggestions!

 

Did you use the correct bulb?

 

Yes. Replaced with OEM bulbs...

 

Are they the NAK ones and not the regular NA ones?

 

Check for power and ground at the socket.
No need to go any further until you know if you have power and a good ground.
A test light is a super easy and quick method.

Let us know what you find and we can go from there.

 

I just found this thread and I had this problem: I replaced my bulbs on both sides when one went out. The next day I got the "fast-blink". It turned out that the bulb (wedge) was loose and not fully seated in the socket. I re-seated it correctly/fully and it gave a distinct "click". Problem solved. I checked the other side and even though it was working ok I hadn't fully seated that one either. Gently pushed it until it clicked.

 

Had the same problem. Bulb wasn't in the socket all the way. Pushed the bulb in all the way and all is good.