Help. Will 285/70r17s fit a 2021 trd OR with stock suspension?

Planning on getting 285/70r17s wildpeaks on my 2021 trd OR. I do have a CMC and my wheels have a -6 offset. I was wondering if this will be enough to fit the tires without rubbing(fender wall, UCAs etc.)

 

You'll probably have to trim some plastic in the inner fender well. Maybe a cab mount chop and flatten the pinch weld if you wheel it.

I have 0mm offset and 285/70/17 and had to trim and heatgun the front fender liner. Since I wheel it I went ahead and did the cab mount chop before I got the tires. You might be able to get away without it hard to say

 

@Seth2197 my CMC is a bit more aggressive than a normal one, at least thats what the guy who did it told me. Im just worried if it will rub the UCAs. I wonder if my -6 offset wheels may help a bit.

 

You should be good for uca clearance. I have maybe half an inch or more at full lock. I think you should have more uca clearance than me. I have 4.5 inch of backspacing and a 0mm offset

 

@Seth2197 thank for the input brotha, i appreciate it. My only worry is the rubbing on the front fender lining(IF)

 

Heat gun will be your friend.

 

heres a picture I had of how much trimming/heat gunning I had to do. It only rubbed while flexing

 

The answer is NO. Rubadub!!!!

 

Seriously, been considering some -04 offset rims. Gonna need some pics

 

My build thread shows what I had to do for -10 offset on stock suspension