What Have You Done To Your 3rd Gen Today?

Great minds think alike. I was actually editing my post to add some specs on an ARB twin compressor myself. I'd be really interested in seeing some real-world testing. I'd guess the difference is negligible. Maybe 30 seconds faster for two tires at once instead of doing them individually? I suppose it depends on what PSI you go up to, as well. I have 33" tires and usually inflate them from 18 PSI to 40 PSI, so I would only be squeaking a little bit more air flow out of that compressor, and only for the first minute or so.

If you're running a higher volume compressor, it might make a pretty big difference. But it seems to me that the biggest benefits to these multi-tire inflation systems are: equalization of all 4 tire pressures (if that's even a big deal to folks), and the fact that you can do all of the set-up and tear-down at the beginning and end, instead of having to move from tire to tire throughout the process. Although that wouldn't necessarily be faster (since you'll probably spend the same amount of time connecting/disconnecting each tire as you would if you were inflating them individually), it does provide you with a larger chunk of uninterrupted "hands-off" time in the middle of the process, which you could use to socialize with friends or grab a snack/cold beverage, I suppose.

 

Took her across the Chesapeake Bay Bridge Tunnel on a road trip to New England for Thanksgiving. Got to see all the weathers, sun, snow, rain, and ice. It was a fantastic trip.

 

Setup and tear down times could be longer with a multi tire system. Instead of a single hose that needs to be rolled up, you have 4 hoses and a manifold to roll up. The down time while waiting is certainly a nice thing, you can use that time to check for damage, check fluid levels before hitting the paved roads, or making sure everything is secured.

As for setting all the tires to the same pressure at the same time, this is a nice feature just due to only having to measure and adjust (high or low) 1 hose instead of all 4 tires by them selves. Granted some cars and trucks do have different pressures front and rear, the tacoma is the same on all 4.

The dealership I worked at had a nitrogen system, it hooked up to all 4 tires at the same time and set all the pressures. It was super fast just due to the volume it could send out in the system.

 

Ordered SS3 Max yellow fogs (non backlit version) from Hotshotoffroad to go with the OEM TRD Pro LED Headlights I ordered over the weekend.

 

Ran that trip many times over that bridge going from Chesapeake to Rhode Island. Love that drive up the eastern shore....

 

@Omizee
The TRD emblem on the front of your Tacoma is attractive.
I looked on Amazon and can only find the typical three color strips.
Do you have a source?

 

Try this
https://www.ebay.com/itm/3845084495...1291&msclkid=2412d3c06f341fb59ec3b266fe26cff0

 

Installed my Victory4x4 Console MOLLE panel today. Works great! Holds my M&P shield 9mm well in the 1.5” belt clip cutout and also added a Streamlight flashlight. Plan to add a multi-tool also! Functional space addition!

 

I also found a TW source! Thanks!

https://www.tacomaworld.com/threads/color-matching-trd-grille-badges.674304/page-18
www.tacos4cheap.com

 

They do look good.
But "ditch" lights are supposed to be aimed at the ditch, and not straight down the hood.

 

i got the SS3 sport. after doing some comparison on the other fogs, this is the best one that liked.

 

yeah these are constructed really well and the light pattern lights up the road making it easier to read the signs

 

Got tired of looking at the chrome ring and rubber grommet, so upgraded to this collar.

 

I ordered this back in June 2019, in person at their Agoura Hills, CA showroom. It doesn’t seem like they’re into selling them separately a la carte to customers. Doesn’t hurt to try…

Universal Load Bed Leg / Tall (Pair) - by Front Runner

SKU: LASS026

 

Love it. I have the MORRFlate and would have bought this based on the price difference.

 

I only tested my MORRFlate with all 4 tires but I went from 15psi to 37psi in 4 minutes. No way I could do that if I had to one tire at a time.

 

Put the bilstein’s together while I had a min at the shop, hopefully throwing them on this week at some point

 

I find it way easier to watch the dial once instead of four times. I errantly used a coiled hose so that can be frustrating at times, as well as my measurements may not be exact and I’m always worried about dragging my hose across the exhaust. But somehow I find it easier. My compressor in under my passenger seat too. So it really doesn’t take much time at all.

 

I love this panel and have the same firearm that would go there. I just don't want to drill into the truck

 

29, so yeah basically lol. I had one too.