1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Leaf Springs, 3rd Gen Take-offs vs. New

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Tah-koh-mah, Dec 5, 2021.

  1. Dec 5, 2021 at 12:15 PM
    #1
    Tah-koh-mah

    Tah-koh-mah [OP] Well-Known Member

    Joined:
    Feb 3, 2020
    Member:
    #318085
    Messages:
    231
    Gender:
    Male
    Vehicle:
    2012 Tacoma TRD-Off Road
    So I have a 2012 TRD-OR with the original leaf springs and am planning on replacing them, they have 160k on them. I know a guy selling a set of 2021 TRD-OR take-offs with only 8k miles on them for $120. Would these be a good replacement? I don't haul anything, don't have a cap, and drive with an empty bed. I like to keep the same ride comfort and stock height.

    Is there any advantage going with new ones vs. low mileage 3rd gen take-offs? I was looking at these stock replacements (non-HD) from General Springs...

    https://www.generalspringkc.com/leaf-springs/toyota/tacoma/2012-2014-toyota-tacoma-leaf-springs/

    $120 vs $320. I guess the question is are the basic General Springs leaf springs any better than the 3rd gen OEM ones? The 3rd gen ones look brand new and is local so I wouldn't have to pay for shipping. Thanks for any advice.
     
  2. Dec 5, 2021 at 12:31 PM
    #2
    TnShooter

    TnShooter The TacomaWorld Stray

    Joined:
    Sep 2, 2010
    Member:
    #42625
    Messages:
    21,356
    Gender:
    Male
    First Name:
    Deogee
    Vehicle:
    07' TRD Off-Road, Auto
    STOCK
    I see no advantage going with NEW OEM over Slightly used OEM.
    They’ll both be “worn” in 3-5 years.

    If you want better springs, go aftermarket.
    If you don’t want or need “better” springs. Buy the used ones local, and save some money.
     
    wi_taco, Geeves77 and whatstcp like this.

Products Discussed in

To Top