What Have You Done To Your 3rd Gen Today?

Finally got a DSM installed that always seemed to be out of stock and plus I installed a remote start for those chilly mornings.

 

sweet set up. What bumper is that? Love the look. Are the lights all Baja? What winch too? Would love to set mine up like this. Wonder if I’ll need a lift because the extra weight?

 

Added the AJT key fob option to my collection.

 

Thanks! It's a CBI T3 bumper, or atleast that's what they called it 2-3 years ago. I think they call it their Baja bumper now. Lighting is all Baja design. Winch is a warn VR Evo 10k. It's definitely a lot of added weight, nothing a lift and 14" 650lb coils can't handle.

 

Time for a change.

 

I like the red screws. I remember when you could get those with the TRD logo.

 

Any idea what the weight difference compared to stock wheels are. I'd like to give my truck a bit more pep sometime next summer or so and reducing rotational mass would be a great way to do that.

 

I had a Ram mount here but didn’t like that I needed two hands to remove my phone it so I changed it to Quad Lock.

 

Today, I finished out with the skid plates. Put the fuel tank skid on. I would have done it sooner, but the Amazon fuel tank straps were too flimsy for my liking, so I decided to purchase OEM straps.

I also watched some football on my tablet in the backyard while admiring my truck’s evening glow.

 

​

 

Installed OME BP51 in the front.

 

Its been rock solid so far.

 

Sorry. I went with Carlinkit

Carlinkit CarPlay Wireless Adapter 3.0

https://www.amazon.com/gp/product/B08ZHCS8R3?ie=UTF8&th=1

 

I'm really been pushing it, I've racked up 71 miles on my new '22 . Not many mods left, today I added bed lights from Amazon, using the existing prewires. Took about 20 minute total. Especially nice when you have a tonneau cover.

 

Thanks so much

 

Yes they do.

 

about the same

 

These are great. Overall, probably the best I've seen yet. I do wish they had cutouts for the bed lights but if they block too much light I suppose I could do that myself.

 

Added TRD Skid Plate to mine! Married it to the Talon CAT plate:








Ed

****

 

Please don’t do it like this (or recommend), “the easy way”! I know I’ve said it before but I don’t understand how everyone seems to pass the obvious- there is a perfect solution for everyone and definitely better than pushing the grommet away to go against the sheet metal. Will work for multiple wire bundles

everyone has the main harness which has an extended rubber sleeve but outside that extended center rubber sleeve (the same area that cable is ran through which we will call the outer perimeter) has multiple ridges/valleys that you can pop your wire through… again multiple ridges that are away from the main harness to pull your wire bundles through. Go inside the cab and light the gromment up and take a peek. Best to pop the hole from the inside and pull your wire in. I say that because I found it best to see each ridge from the inside so you can space apart if you like. And if you want to be extra smear some silicone around the newly passed through wire harness.