Magnuson Supercharger Mega Thread for 16+ Tacoma - Unboxing, Install DIY, Dyno Video

I can understand that urge.

 

yeah but you might need smaller bit's to start with, the oem restrictor is a 0.035 orifice or .889 mm

 

Those were just the ones that I bought. I had no idea what the S/C was using.

 

I had to pull it up and look. Appears this one would be a good match

$22 GYROS 20 PCS Mini Twist Drill Bit Set #61 to #80 w/Dome Storage Case, High-Speed Steel Wire Gauge Micro Drill Bits for Jewelry, Plastic, & Soft Metal | Small Drill Bits for Pin Vise & Rotary Tool

https://www.amazon.com/Gyros-45-22010-Speed-Steel-Gauge/dp/B000SKVF8I

 

Ya, I'm leaning towards leaving it in.
It's not like I need instant boost off the line. That could be hard on the drive line anyway.

 

I'm pissed that i have the 1st gen URD equal length exhaust, and even when i added a resonator it's still obnoxious from 2200-3200 rpm.

 

Excellent! I like those little guys.

 

Nah. It was butter smooth on @Formidable 's Taco.

 

cause all those MT guys have all the fun and us AT guys have to re-engineer stuff!

 

Things were not all rosy over here. We needed a tune just as bad which oddly helps with shifting. I'd also say that the ADM and 2LM are pretty much required for us. And, the Metal Pedal Mod is out there in the wings.

 

I still need to do the accumulator delete. I had the 2LO mod in the garage before I even brought the truck home and it is a must for backing boats up and trailers.

 

There's a new effort or two for offering plug and play ADMs. See the last couple pages of the ADM thread.

 

I’m MT and took it out. Has the same perceived effect as dropping to a smaller pulley for down low throttle response. It’s never going back in.

 

I’m in an automatic and not putting the brass valve back in

 

I know about the ADM mod. What is the 2LM/2LO mod - I have a camper and yes backing is a pain in the ass - cause I am a bad camper backer!

 

The 2Lo Mod is a harness that @BigWhiteTRD dreamed up and @lapoltba is having made in batches:
https://www.tacomaworld.com/threads...ow-range-for-the-3rd-gen-tacoma.614743/unread

It tricks the 4WD ECU into believing that the ADD is engaged. So, it allows us to get in low range and turn as tight as we want.


I'm pretty marginal with trailers, but I only have a tiny one that I can't really see. Hahaha!


It also helps with most of the 4WD exercise, as you can flick it into 4Hi with the ADD disconnected also and drive around.

 

yep that is not for me then = I need a camera on the back of my camper so I can see the shit I am about to run over or into!

 

Hahaha!


The newer GoPros have live streaming to your phone?


Or, get one of the anytime front camera harnesses and use the front input for a camera on the back of your trailer? I'm not sure how happy a camera would be with that long of a run, but someone like @BigWhiteTRD , @lapoltba , @Puppypunter , or @daveeasa might know?

 

gotta be something wireless for sure - put the camera on before leaving and take it off after backing in. Will do some more looking into this. Thanks!

 

You're welcome!