hid help please!!

thank you for your help! so im still learning about hid and how they all work, well two weeks ago i bought a hi/low beam kit thinking it was going to be low and then a brighter high that comes on. well me not knowing anything found out that i should of bought a bi-xenon kit i belive. is there any way i can but just the bi-xenon bulb and plug it in? the kit is a 35w 8000k. thanks for all your help.

 

I think if you were to do that you would need a relay for the bi-xenon.

where did you get them from?

 

a audio performance shop. i would like to have both high and low in xenon. not just one or the other with the xenon and then a holigen bulb... and do you know know if the hella 500s will accept a h1 hid light? or do need to buy h3?

 

well i dont think that you would have one in xenon and one in haloged because that requires two bulbs, and you can really only fit one bulb into the housing.
I would call the shop up and ask them if the kit you bought has high and low beams. If not then they might say you need a relay or something like that.

Not sure about the hella 500's

And just something else. I got my kit from DDM tuning, lifetime warranty, and so far they have been flawless. if you want highs and lows, its the H4 hi/lo Kit and will run you only 50 bones.
http://www.ddmtuning.com/Products/Apexcone-Raptor-HID-Kit