What Have You Done To Your 3rd Gen Today?

Swapped the shift knob today with the TRD Pro knob. Has a really nice feel to it.

 

Trim tool if you have it if not I used a pocket knife just fine…

 

I just slid my very skinny flathead screwdriver along the right side of the panel and carefully tried to pry it out until my fingers could pull and it pops out pretty easy. A pry tool would be the best, but I don’t have one.

 

that is a nice looking knob you got there sir. Should probably replace mine, it’s starting to get worn down and beat up.

On another interior refresher note. Does anyone know if an aftermarket company makes the painted silver pieces for our interior, mine are pretty bad looking after 5 years old. A guy I work with that daily’s his truck and uses it for work purposes has basically no paint left on his trim pieces, hardly any silver left they’re mostly black now. And his truck is a 2018.

 

https://www.amazon.com/EliteTool-Re...ds=automotive+pry+tool&qid=1639081555&sr=8-21

$10 well spent.

 

How did you power them?

 

Prinsu looks so clean. Debating on this or the uptop one

 

What’s the 4a? I’m looking at fox dcc 2.5 coilovers. Doesn’t seem much more to get them through accutune.

 

Which you like better?

 

That looks good! Not a fan of the propriety case though

 

Where does that hole lead to? You drilled through your entire glovebox?

 

Its a continued effort.. I got the front bracket set up on the tank. Im going to use the rear rail and attach a bracket so the tank will slide in and be tightened in the front with 2 screws+wing nuts.
I have to finalize the dimensions before I have my brother CNC cut the bracket for me. Then paint the tank black so it can be used as a solar shower.

 

Can you see an ar15 on it from outside or is it high enough it’s hidden? Obviously I wouldn’t leave it in 247

 

I’m getting that also! So clean looking

 

I’ve never seen That, just the ones that go under the handle. What does it protect?

 

big money

 

you upgraded your stock leds?

 

That’s a slick dash pad. I just saw Jessie post a video of it

 

Which ucas you go with?
dope man, awesome it doesn’t cause you issues..
When I still had stock fenders I rubbed like crazy on the portion near the door at any sort of incline or turn with speed, and I kept cutting it and making it so ugly I eventually went the fiberglass route…

I’m golden now
Plan on making a post about it soon, it’s in the shop getting painted rn