What Have You Done To Your 3rd Gen Today?

Awesome you didn’t have to do a cmc

 

Do you know what your SPC's are set at? (How many degree of added Caster do you have?)
Setting "G" is no added Caster. You just use the SPC's to fix the Camber.
If you're running 35" tires with only 2" lift they will rub on the upper fender liner/well at full stuff. You can install larger bump stops to limit the up-travel of your suspension to get the maximum up-travel without rubbing. These truck are great for overlanding. But they are not the best option for extreme flex off-roading.

Good Luck with your build!

 

Got the UpTop Alpha Rack up. And lights wired in. Very pleased

 

Yes, I've been looking at the Cascadia 4x4 85W hood solar panel. Also dig the idea of a set up similar to what @Trail_limo_pro just posted, with solar attached to the iKamper.

 

I'm running the cascadia, I love it

 

agreed. I think I'd rather put that money into a couple lights triggered by the reverse circuit. I do like the tag-light kill mod somebody showed me the other day. I'm gonna have to get that at some point.

 

If I can't see well behind me I switch these on.

 

I still want to do something like this. I live in the mountains so extra light for working is a great help. This would make life much easier.

 

I'm thinking about doing something similar, but tucked up behind/under the bumper and pointed lower, more at the ground, than that and trigger the relay with the reverse light circuit instead of a dedicated switch. Might also run a separate switch just for assholes I see driving around with their lightbars on.

 

I have 4x of my 6x auxiliary light circuits paralleled to a wireless receiver so I can turn the lights on without being near the truck.

$37 12V 4 Channel 4CH RF Wireless Remote Controll Switch Relay Module 433MHz

https://www.amazon.ca/gp/product/B012RHTOU0/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

 

Are you just using the relays as low amp triggers for the main relays or are they full load? Also, did you install the box inside the cab or under the hood?

 

Got some upgraded shoes today, Cooper AT3 LT C Load, 265/75/16. Now to hunt down something in a used tire of similar height/size for the spare before Mr Murphy strikes.

 

Fluid Film application done.Ready for North NJ salted roads.

 

Installed the color matched door edges after getting sick of looking at the filthy clear ones

 

I installed the wireless relay right on top of the 6x relay module inside this project box. The wireless relay module can handle 10A throughput.

 

did you find a solution for power up there or go with a harness?

 

I like LEDs

 

I sold him a harness for it

 

Nice, where'd you get the black ones? I'm considering the black to match the rest of the bumper.

 

https://www.carparts.com/bumper-end/replacement/set-rept761143

They are full replacements not just covers install was super easy