What Have You Done To Your 3rd Gen Today?

Thanks, if you would, take a few picks when you're done. Thanks

 

Diode Dynamics makes a neat rear backup/brake light kit:

https://www.diodedynamics.com/stage-series-reverse-light-kit-for-2016-2021-toyota-tacoma.html

 

5.29’s are in! Not really exciting as far as pics tho but hands down one Of the best things I’ve ever done to the truck. Went with the ECGS complete assemblies and had them put in. Up next will be KDMAX

 

Take that you CAT BASTARDS!!!!!

 

Built Bernie a platform, but he still wants a double cab ‍♂️

 

I did similar, but want to mount a relay where you put your box. What size screw fits those two threaded holes? (mounted my box with double side tape onto the fuse box cover lid.)

 

Installed these Cali Raised LED TRD Pro Raptor Grille Lights with the help of Hybrid 2.0 adaptors.

 

I had just dressed my fenders, so the color matches better than this leads on.

 

Ocd.....got a rubber plug for the pin hole in the factor 55 winch hook.

 

They look awesome

 

Looks good, I want to add them to mine as well. what are Hybrid 2.0 adaptors? Link? Thanks

 

picked up 36sq. Ft. Of kilmats on Amazon for about $70.

$75 KILMAT 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

KILMAT 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

after I installed the ground shaker sub box I realized I needed to trim the child seat anchors off to have it sit flush to the rear can wall, and the oem panel mount tabs needed to go as well. Dre melted and done.

but w/o the oem plastic back there, the road noise resonated through the sub box and became overly pronounced. So, I pulled it all out, and installed the kill mat. I didn’t even use 1/4 of the box. It covered the back wall and about 6” under the carpet.

had a bi&?h of a time getting the box back in because the clearances were much tighter after the mats. But it’s in.

went for a quick freeway haul, windows up, stereo off, a new born could have fallen asleep in the back seat it was so quiet.

I’m now going to plan on using the rest of the kill mats on the floor. But that’s another all day project.

 

Yup, that is definitely OCD.

 

I have some extra dynamat lying around the garage from a previous project. I should do the back wall

 

not sure what you mean.

the foil back is a “heat insulator”. I then have the sub box sitting against all of it.

 

Here hybrid2.0 Clip in's or here 3bMakers Clip on's

 

Nice Rig!!!

 

do it. The whole process, including disassembly and re-assembly took all of 2 hours. Completely worth the time.

 

but then I am going to want to do the floor as a ton of sounds comes in there and the doors and the roof lol. Its a sickness and an expensive one

 

Installed a Prinsu rack (I think it looks good).