What Have You Done To Your 3rd Gen Today?

ive been looking for this for awhile. Thanks for the link.

 

@MESO when can I use those buttons on the lower right side to control something else?

 

Replaced transfer case oil. I was a bit surprised to have oil dribbling out of the fill plug. Had to lift the passenger side up a bit to cram it all in there.

 

Weird...and it was made by AVS? I wonder if they changed the formula they apply the logo with? Might have to go straight to paint remover.

 

Use fingernail polish remover, without acetone, and a cotton ball. Used on at least 8 sets of visors.

 

Always wondered how those shackles were installed...firgured there was a bracket...thanks for the pics!

E
****

 

Sandpaper will get it off.

 

I guess I just wasn’t patient enough.. I gave it another shot (using paper towels instead of cotton balls) and it finally came off with about 5 minutes of elbow grease

Thanks for the help fellas

 

I went all in with the diode dynamics. I want as much light on the trail to see low hanging limbs and rocks. But anything is an improvement..

 

Installed bed lights from Santa.

 

Added a BajaRack Roof Rack / Basket today.

 

Installed the Rough Country seat covers today. Really impressed with the quality and fitment of the covers. I had seat covers on my 2nd gen and they fit like crap compared to these. Install took about 45 minutes. They do offer a little more comfort and padding which is a plus.

 

Roc Block.

 

Installed a little magnetic taco my daughter made me. Now baby Yoda can have a second course.

 

Paint matched the mounting brackets for some LED pods from Cali Raised

 

Trying to fix this problem caused by maybe someone backing in to the bumper and taking off. iDK


Following the video From Trail pass here:
https://youtu.be/w4zmvqFh4dk

After taking it apart it seems like in addition to some of the top clips broken I'm missing the blue clip that goes inside on the right side.
I got the new cover but it didn't come with new clips. Got to wait till I get the clip from Amazon or the dealership. Rats.

 

So this happened today.
Bought July 2019.
(Also my cat is 6 months old today.)
Milestones.

 

The Marinco plug stopped working in September. Opened it up and the wire conductors were all corroded. I replaced it with a much less expensive

$7 Spurtar 50A 6 AWG Battery Quick Connect/Disconnect (2 Pack) Wire Harness Plug, 12-36V Quick Connect Jumper Cables Battery Terminal for Car ATV Lifts Motors Trailer Towing Winch – Gray

Anderson-style plug, and changed the wires from copper-clad aluminum to

8 Gauge 2 Conductor Marine Wire - 6 ft Duplex Flat Marine Grade Wire Tinned Copper Oxygen-Free Insulated - 8/2 AWG UL 1426 Standard PVC Wire for Boat, Automotive, Speakers, Camper & Trailers

tinned copper:

 

I installed them myself in my 2020 SR5. The wires were there. Should be a 20 minutes job tops.

 

meh it’s fun, I like supporting blue ridge overland. Honestly I drive like shit and everything I put in it flies out when I drive. Paired with @MESO hex rack it’s a killer combo and the bags on my hex rack prevent things from flying out right away.