Chuks Cement TRDOR

Current Mods:

Exterior:
Prinsu Double cab rack
Prinsu shell rack
Snugtop GB sport
- Sportmans package
Decked

SSO Full plate bumper
- Smittybilt XRC 2 9k
-- Synthetic line
-- Factor 55
-- Factor 55 1.5 Hawse
- Baja Designs 30" S8 Amber Combo
--Ch4x4 switch
--Backlighting T tapped

Under the hood:

$600 ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor, Ideal for Air Lockers Locking Differentials, Tire Inflator, Air Horn, Air Tools and Pneumatic Tools.

ARB CKMTA12 OBA
- Slee Offroad compressor mount
- ARB manifold
- ARB relocation kit (bumper)

Suspension:
Old Man Emu 788 Springs
- Bilstein 5100's
Icon RXT Stage 3 Leaf springs

Method Race Wheels - Bead Grip 703 - Matte Black
- Toyo Open Country III - 285/70R17

Interior:
DMM
- Garmin Inreach
- Gopro Hero 9

 

nice truck.

 

Added the SnugTop GB Sport and TRD OR (Pro badges)

GB Sport with outdoorsman package. Spoke with Snug today and after asking for my serial number, they stated it’s a 200lb shell with a 500lb roof capacity. On the inside drivers side is also a 2x USB port with direct power.

 

Added the Prinsu Rack to the SnugTop. DC Prinsu is still on order. 50lbs for the rack.

 

Today I was able to use Kuat mounts from the Grip 4/6 to create a low-profile, lockable system for my Riversmith fly rod rack! Such a key tweak!

 

Added the Decked system. Fairly easy and straight forward. Some small bumps in the road and to took 4 hours to install.

220lbs for the Shortbed decked.

 

Pretty damn jelly of that decked system.

 

Added the Prinsu cab rack. Rotopax on the way. Bumper should be here end of August. 50lbs for the cab rack.

 

Pretty happy with how smooth they roll. I was afraid with the design of the shell that my yeti would not fit, but it still does. I do with that they would have an option for an ammo can with a cutout for the 110v but I’ll take care of that eventually with a dremel. Also preserving the panels for the small drawer is pretty key.

 

I run a softopper and lack of storage space above the decked system and below the topper is what has always held me back.

Yours looks great though. I look forward to following along.

 

Prinsu Cab/Riversmith on, I’m averaging 16mi/gal. Before the Prinsu cab/Riversmith I was at 19/20 mi/gal. Going to take the Riversmith off and see if it’s some how the Prinsu cab.

 

Onboard

$600 ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor, Ideal for Air Lockers Locking Differentials, Tire Inflator, Air Horn, Air Tools and Pneumatic Tools.

ARB CKMTA12 installed with a Slee mount.

will update….

Points I wish I had known.

 

Added Rear Icon RXT springs
OME 887 Springs with 5100 Bilsteins
SSO Full plate bumper
- Smitty XRC Gen 2 9.5k winch w/synthetic rope
- Factor 55 1.5 Hawse Fairlead
- Factor 55 Splice
DMM dash mount

 

Love how clean the build is! Looks great, can't wait to get a shell on mine!