What Have You Done To Your 3rd Gen Today?

Yikes that's cold. Gotta be tough on batteries. 6 years is fantastic. I'm positive I won't see that.
Love your user name and that movie.

 

You need the latest firmware version. You can send it in and have it done, cost isn't much and then the functions are in the x-gauge and you'll need to enter the codes for those. They are also on the scangauge website.

I just had mine upgraded in Canada, the US gets a flash of the new firmware, Canada gets a new circuit board with the latest firmware and while he was in there he noticed the backing coming off my screen, so he also replaced the screen. Great service. I have mine set for the 2 transmission temps, water temp and charging volts.

 

The custom pids are here:
https://www.scangauge.com/x-gauge-commands/2016-3-5l-equipped-toyota-lexus/

 

Is that an eagle talon?

 

Damn I'm getting that alot

But yes, it's a 95 non turbo. Pretty rusty, but working on that.

 

Nice! I love Eagles. My dad had an Eagle Vision when I was growing up and I haven't seen another Eagle in person since I was 5. All Eagle cars basically vanished

 

Today I modified the MESO Hex Rack Sunroof to fit onto my access cab. Just had to flatten out the bend in the front till almost flat then I made some brackets for the rear mount location. Now just have to clean it up and paint the brackets to match.

 

Rigged up an old trunk net from my car as a hammock over the back seats. Works nice for jackets and towels light items…

 

Looks like we had similar goals today lol

 

Damn, I thought the headrests in the quad-cab blocked a lot of the view out the back but the access cab rear headrests are on another level.

 

@MESO

 

You forgot to put the cable on and probably forgot to connect the switch but you should still be able to open from the outside. With that said, Try removing the switch plate and see if you connected the window switch. I can’t remember on what models the window switch needs to be connected to lock/unlock from the master switch(Driver door).

 

I have everything shipped to my work address, took the last two weeks of December off and this came in while I was gone. It's a heads up display, had it ordered since November of 2020.

 

Wish her products/customer support were as good as her packaging.

 

Finally got around to installing the Crown Performance extended brake lines and ATE TYP200 fluid that's been sitting in my parts room for months. Also someone was paying attention to my Amazon wish list and ordered me the Powerstop K137 front brake upgrade kit for xmas so I threw that on as well. Absolutely hated how the stock brakes felt with their complete lack of bite, so now the brakes feel like you would have thought they would on a brand new vehicle. Happy with the upgrade.

Still need to find the time to paint the calipers and drums.

Note: The rear lines are pretty awful to install - there's just no room to get the line wrench in there.

 

Those days you wish you had remote start.

 

Yeah. Not to brag, but used my @N2DesignsInc this morn. Just forgot to turn my butt warmers on.

 

Lol, just start it. By the time you get all the snow off it will be warmed up.

 

I'm gonna have to try that out today...the remote start!

We had our first snow day here in Delaware today.

E
****

 

@TacoTime55 I can't speak for others, but I have the @N2DesignsInc remote start. I've had mine on almost 2 years. And I love it. Jimmy has the best customer service. Called me personally to help get the app set up.

But if you have a push start, it's literally PnP. Even if you don't get the hardware for app, and just remote start, it took me about an 1 hr to install.

Look at their install vids on YouTube. Very informative.