Post your Lifted Double Cab Long Bed Tacoma's

Amazing - nice setup!

 

Extra pics for extra lift

 

What tire size are those?

 

Before/after 887s, single AAL & 5100s @ 0 on 265/75/16s
Saw ~2" front & back.



Pulled cap off before selling the truck.

 

Here's a recent shot of mine
Dopinsons Mrr's in the front with there highest spring rate, spcs uppers and total chaos lowers rear is Deaver u402 stage 2 with hammer hangers and ome bp51 shocks. Tires are 265 75 16s for winter.

 

Early morning. 37F in Long Beach, CA

 

Bilstein 8112 w/650 springs, SPC UCA, 8100 w/Deaver Stage II leafpack.

 

What size tires?

 

Bilstein 6112 in the front, Bilstein 5160 in the rear. Fully extended. All pro leaf springs.
Probably about 2.5" of lift.
BFG KO2 265/70/17

I got it all that way used. Don't love the look of it. I think I need to either reduce the lift by an inch or so. Or change the tire and/or rim size. It looks like it's sitting too high on dainty wheels. And I don't need quite that much lift. My only concern with lowering it is rubbing.

Anyone have any wisdom or opinions?

 

285/75 r16
Gonna be going to either 315/75 r16 or 35x12.5x17

 

Any rubbing?

 

None in the rear since I have deavers and they lift quite a bit. The front only rubs when it’s stuffed to the max. I did the cab mount chop and I’ll be trimming my fenders before I go to larger tires.

 

Can you tell me your center of hub to fender flare measurements are, what clip setting the 6112s are on, and what springs you have? I just installed 6112s on 5/4 and achieved basically no lift wit hub to flare measurement of 21" I was just curious because toy have a long bed like me and wondered if it was a long bed thing. I have sliders and skids that add up to about 380 lbs. so that may be the cause. I think your truck looks good as it sits by the way. 265/70R17 should fit with no rubbing on stock suspension if you want to lower it.