Post your lift height and total miles driven after getting lift

2.25 front and 2 in the back plus the needle bearing. Had to do 2⁰ shims but runs like a dream. 13k on it.

 

2” front from TRD lift shocks and 1.5” rear from Icon AAL. All is well other than needing to do the ECGS bushing. So far, about 3k miles on lift.

 

Was your ecgs done because you felt vibrations? If so, what miles did you start feeling the viberations?

 

Yes, doing the bushing because of a rhythmic vibration. The vibes started almost immediately after lifting the truck. Probably the first 50 miles.

 

I was looking at bilstien 5100s and the icon 1.5 for 2nd gen. Did you get close to the advertised lift. I only plan on running 32s.
Ps my truck had a new frame and leaf springs installed in 2015

 

Well, I drive a 3rd gen which sits 1” higher in the front than a 2nd gen to begin with (not sure if there is a rear difference) but yes, I got the exact lift in the rear described from icon at 1.5” as well as the 2” in the front from the TRD shocks on the top setting designed for the DC.

 

The amount of play between the stock and EGGs bearing is very noticeable, with stock having a bit more. Even my buddy who was a Lexus Master mechanic was surprised at the amount of difference.

 

Cut some plastic upfront. Theres nothing structural there

 

Never cared enough to measure but I wanted minimal lift. Fox 2.5 dcs all around, jba UCAs and icon rxt on setting 1…and bushing was replaced. Rxt setting 2 is in my future though. Saggy biatch on setting 1 a few weeks ago on my trip out west. But 55+mph on 25+ miles of horrible washboard roads puts a smile on my face every single time.

shoutout to @Texoma for his outstanding work on my truck.

Edit: about 5000 miles of bliss on this new suspension setup.