Wheels with offset

Going 285/75/17

 

Probably gonna rub. My 285/70R17's clear just enough under full load at 0 offset with UCA's and a 3" lift. Maybe invest in UCA's instead of spacers.

 

I have UCA's, it's the fox reservoir I'm concerned about.

 

I've seen some crazy things, but what shop were you at that has ceramic tile on their floor? It looks nice new, but I could only imagine how that grout looks after a few hundred pounds of brake dust and grime. Not to mention how chipped up the tile gets from dropping air guns and other tools.

 

I'm willing to bet those are not actually ceramic tiles, lol.

 

Here's -25 offset wheels w/ 265/75 R16 vs stock wheels/tires:



Here's how much they poke out vs stock:





With that much offset came a lot of rubbing. Had to remove the front mudflaps, trim some pieces of the fender, and take a heat gun to push in the liner. Still occasionally rub if I hit a bump going into a sharp corner too fast.

 

It’s going to depend what tires you got. I have 285/75/r17 with zero offset Method 702’s that rubbed. From the looks of how I was rubbing against them, it looked like I needed at least half an inch more or so. I didn’t want to take a chance so I just got 1.25” spacers and now I’m completely clear with no rubbing anywhere whatsoever.

 

haha I work at a Porsche Dealership. That is about as filthy as our shop gets. We have a guy constantly cleaning our shop. Ill take some pictures for you

 

Must be nice! I'm guessing AC and heat as well?

 

Yes on both but we just keep the doors open for air flow most of the time.

 

What brand of roof rack do you have?

 

Lift Kits?
what size wheels and tires and offset?

 

Prinsu