2021 Trd pro with icon rxt leaf pack

Has anybody put the Icon rxt leaf pack on option 1 on a stock trd pro? i have about 150-200 pounds constant weight (DiamondBack hd,spare tire and tools) and i dont like the sag. I would like to see pictures if anybody did this to their pro tacoma

 

I don’t know if this will help, but I put in the wheelers 1.5” add-a-leafs on my 21 Pro - they are known to retain OEM ride quality. The install went great and with about 400 lbs of weight in the bed, I netted out 3/4” of lift in the rear giving me perfect rake. The ride remained exactly like stock - not stiff at all-
Perhaps it may work for you.. and its less $$$$

 

Sounds good thanks!!! I will look into those
Any pics of your truck unloaded with the add a leaf?

 

Oh yeah and did you lift the front or are you still stock?

 

I didn’t lift the front as the weight in the bed brings things back down to about 3/4” lift, giving the truck a slight rake- which I like.
Will get some pics for you tomorrow when I have time

 

I would agree that the AAL holds weight well. I loaded up about 400 pounds with out sagging and head a good ride.

Shameless plug: I have an aal pair for sale if you’re interested!

 

Not to cost you a sale animizer, but the Wheelers full length add-a-leaf’s seem to preserve the OEM spring rate for TRD Pro’s with a load on them. If you use the stiffer, shorter add-a-leafs the ride will suffer. I know, I used a shorter pair I purchased from Amazon on my 2017 sport and they were REALLY stiff.

 

I also tried sumo springs- they were bouncy as hell……

 

One more thing, the truck unloaded is 1.75” higher without a load. (I measured when i did the install) They do settle a little over time

 

Not the option one but this is my uncle's, still on factory Pro fox shocks with the rxt pack configured to option 3 for his smartcap and hardshell tent. Rides pretty well and is pretty leveled. I think the rear is about an inch higher than fronts which are also still stock foxes. I don't have pics of any other angles unfortunately.

 

perfect thanks!!

 

2019 TRD PRO. Installed Eibach springs on original Fox Shocks with JBA High Caster UCA and Icon RXT Option 2. Leer Mid Rise Cap and drawer in bed. Wound up with +1” in the front and + 2.25” in back. So about + 1.25 rake. Maybe 3/4” more than I was looking for but we’ll see if it settles a bit. Have not yet hooked up my off road trailer. Suspect that will level it out nice. No regrets so far.