Tacoma Lift

I live in Sacramento Area and looking to get my truck lifted to be able to install 33's with an aftermarket wheel. Any recommendations on Toyota Modifications places in Sacramento or nearby areas?
Thanks in advance.

 

Try asking around in the regional threads. Lots of helpful people and information there
https://www.tacomaworld.com/forums/regions.36/

 

Do you have the parts already? I’m sure if you buy the lift kit, me and other people will be willing to come and help out install it. It’s not that hard and can be done in half a day

 

Very easy to fit 33" tires. Contact Headstrong off-road they are in Cali. Not sure if they are near you? Don't go over 3" for a lift. (I'd do a 2"-2.5") Get some SPC UCA's and set them at "F" or "G" and have your alignment shop adjust your Camber with the UCA's. Should clear the cab mounts. (No need for a cab mount chop) May need to trim some plastic from the front bumper area but very minimal. Stay with 8" or 9" wheels with approximately 4.75" BS and you should be golden! I'm able to fully stuff my 33" tires no rubbing, on a 2" lift. No cab mount chop.

 

Badass! By “full stuff” I assume you mean actual wheeling right?

 

It says he Mall Crawls!! Probably full stuff on speed bumps

 

Yes Wheeling. I built this Tacoma Specifically for mountain trails to go hunting. (Yes I have different wheels and tires now)


This was my "mall crawler"

 

What size tires are those?

 

I'm not sure if you're asking me?
But the Cement gray Tacoma is running 35x12x18 BFG tires

 

What made you decide to sell the Pro and get the Off Road? That was a sweet looking Pro (both truck are).

 

Thank you for the info, appreciate it. The truck is looking great btw.

 

That wasn't a Pro. That was a TRD Sport. I wanted to adjustable seat of the new Tacoma OR. With the locker. My hobbie is building these trucks. So the TRD Sport was as far as I wanted to take it. Needed a new project.