400W Anytime Harness + Outlet Addition (SOLD OUT)

Man I really need one of these, But Im late to the party again!!

 

You are early. They hit the streets soon. Stay tuned.

 

I found a few more prototypes I can sell here if someone is looking. If you want a production version please PM @GuildOutfitters — he’ll be starting his own thread on his Vendor Page which I’ll share here when it’s up.

 

I’ll take one

 

Interested as well.

 

Thanks! I sent you guys PM’s.

I’m fresh out again. I’ll update when Shaun gets his page up and running.

 

Missed it again.

 

Sub'd.

 

For you folks waiting on harnesses you can get them from @GuildOutfitters website here or follow this link to his vendor thread on TW.

 

Purchased. Also picked up a switch illumination harness. Thanks!

 

Got my harness. Thanks for the post & link

 

I just got my harness, are there instructions anywhere?

 

Didn’t find any too. But once you open up the center console, it’s pretty straight forward. There’s only one way the plugs will go in then just screw on the ground wire from the existing one you will see there.

 

Only one thing you have much choice with and that’s the ground hoop location. I did mine on the side of the inverter enclosure as it’s a small bolt.

 

Shaun made an install video. This should clear up 99.9% of all questions, but of course just hit me up if you run into trouble!
https://youtu.be/pELXTjQ44uA

 

Thoughts on when these things will be available again?

 

guildoutfitters.com

 

Any tips to get a tight fit on that outlet in a panel? It's made for the adapter plate in the T4R that has a thicker piece for the locking clips on the sides of the outlet. I was thinking that slightly under sizing the hole and having a tight friction fit should help. Or adding a plastic backing plate/doubler to the panel where it will be installed.

 

You can add some electrical tape or some other shim material to get it snug. Just be careful with the clips on the sides! Those OEM outlets have terrible QC and, for some reason, every 1 in 5 units has noticeably flimsy clips.