What Have You Done To Your 3rd Gen Today?

Might be a good idea to plasti-dip the ends of the brackets. I suspect that the single attachment point would allow the lower portion to slowly rub it's way through your bed liner. Dipping them might slow that down (if it's ever going to be a problem at all which is not yet confirmed)

 

That's a good deal. Only a few bucks more than I paid for the knock off one I got a year ago.

 

Love the look. I did the same thing with my 2020 Sport DCLB but with the Toyo AT3's. Looks more like a truck and drove more like a truck rather than the factory Firestone's LE2's.

 

It was Comms weekend with my Dad. I mounted up a Yaesu 400XDR in my rig. Then we mounted up a Yaesu 857D in my Dad’s rig with the dual HF and VHF/UHF antennas.

 

Not a bad idea. Thanks!

 

Christmas in January haha thanks to FedEx delivery on Sundays who knew?!

TRD Skid Plate and 1 of 2 OEM LED headlights. Weird the other one didn’t come at the same time but a minor inconvenience got the wiring harness all set just gotta wait. Expensive but that’s what I get from straying from doing it right the first time by thinking I would be saving some coin going non-OEM…

 

American racing wheel didnt fit. They hit the break calipers. So these wheels are inbound as the replacement.

 

Love those.

 

Wallet wasnt happy with this i bet lol

 

Installed SS3 Pros

 

Skid plate was an excellent investment, especially at the price discount I got on that sucker.

The OEM LED headlights, however, hurt. Thank goodness for 6 months no interest and Chloe Kuo’s discount code from her YouTube page lol every bit helps to justify the purchase…

 

Did my first oil change and the people weren't lying the oil filter canister was hell to get off. Couldnt find my breaker bar so this was my solution.

 

Weekend 2 of Project Suspension. Added preload to the front shocks, and then emptied several purple bottles doing the front and rear diffs, and T case fluid swap. T case was pristine, but the diffs didn’t look great. Unless the stock Toyota gear oil is silver/gray?
I swear it rolls better now. It had seemed to drop speed pretty quick when my foot was off the pedal, and that seems much better now. Or, it could be all in my head to justify the work!

 

Added grip tape to my Mobtown bumper so I can still stand on it without slipping off. That powder coat is slick!!

 

How hard was it to install it? Any instructions or videos on installation?

 

Do you think they have a good seal? Don't want leaks!

 

It fits well. I put some seal around the edge to be safe. If your ordering one this fits 2nd gen and 3rd access cabs. The double cab one is larger and has a cab light.

 

Fyi, the OP has an Access Cab like myself. The 3rd brake light is not the same as yours. This is an example of one of the many mis-steps by Toyota engineers. The AC 3rd brake light mounts from the outside where as the DC mounts from the inside.

 

It was easy. Its for access cabs and you only have to undo the 2 screws located on the outside. Then clean the old seal off. Plug and play. I put some seal around the edge to be safe from leaks.

 

Installed my SSO Slimline Hybrid Bumper and Warn Xeon Platinum 10S. Have to wire in the winch and spool another time - to tired. Also going to have to relocate the lightbar to behind the grille. Even with a control box relocation kit no way the lightbar is going to fit. I read the SSO instructions - I just didn't follow them .