what are my options for hardwiring a 90w air compressor?

I'm looking at installing my first switch bank. Was looking at s-pods but they are 40W max per channel. Looking for more info and options to use my air compressor (90 watts), rear lights and front light bar (so far). TIA

 

IMO, You should always use a relay with a switch. Not only is this safer, it allows you to run smaller gauge wires through the firewall (or speedwire).
Switch > Relay > Air Compressor

I would also make sure to properly install an in-line fuse. Back before I knew much about wiring I had a switch catch fire in my old Jeep. Some will say that you can get away with wiring directly to the switch with small loads (like LEDs, etc.), but I wouldn't recommend this. FYI; 90 watts seems pretty low for a compressor.

Relay Examples:

$30 True Mods 12V DC Auto Waterproof Fuse 5-Pin Relay Box Block Kit [6 Bosch Style Relay Holder] [6 ATC/ATO Fusible Holder] [Relays & Fuses Included] Universal Relay for Vehicles Cars Marine Boat Jeep

https://www.amazon.com/Waterproof-Included-Universal-Automotive-Vehicles/dp/B08KHVHLL5?crid=18OAIXWAXXCQ3&keywords=car+add+on+relay&qid=1643043763&sprefix=car+add+on+relay%2Caps%2C88&sr=8-1

$25 True MODS 5 Pack 5-Pin 12V Bosch Style Waterproof Relay Kit [Harness Socket] [12 AWG Hot Wires] [SPDT] [30/40 Amp] 12 Volt Automotive Marine Relays for Boats Auto Fan Cars

https://www.amazon.com/ONLINE-LED-STORE-Waterproof-Harness/dp/B01MTQNJKM?keywords=marine+relay+block&qid=1643043776&sprefix=marine+relay%2Caps%2C97&sr=8-5

Switch Wiring:

$30 Metra MC918-20 20-Feet Nine-Conductor 18 AWG Twisted Multi-Use

https://www.amazon.com/Metra-MC918-20-20-Feet-Nine-Conductor-Multi-Use/dp/B004H1KAMQ?crid=1VPOUGZL4THC1&keywords=speed+wire&qid=1643043958&sprefix=speedwire%2Caps%2C95&sr=8-3

 

Thanks! My husband told me wrong its a 90 amp compressor. We do plan to use a relay - thank you for those suggestions.