What Have You Done To Your 3rd Gen Today?

I don't keep a garage door opener in the Taco, I have one on my keychain. Bought a 2 pack on Amazon for 8 bucks about a couple of years ago. They work exactly like they should. But since I don't park the Taco in the garage they only get used every so often like when bringing groceries home and stocking up the garage beer fridge.

 

You guys don't use the garage door opener in the mirror?...

 

Added a big tranny cooler and fan the other night and got that wired up, put my old big tranny cooler as the power steering cooler, and fixed my exhaust I crushed up yet again. Think i just need to skid the entire underside Did the serpentine belt, swapped in my stock driveline as I usually just swap the beat up 1pc driveline for wheeling, and think my truck is ready for king of the hammers!

 

Got the UltraGauge installed today. Have used

$160 ScanGauge - SG2 II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges , Black , 5"

ScanGauge in previous vehicles so this will be a first for me. Already a couple things I like better about the ScanGauge: from what I recall on the ScanGauge you can just enter your tire size and it'll automatically do the math for speedo, etc. Seems on the UltraGauge you can only adjust speedo for tires by calibrating which requires driving 3+ miles between known mile markers... kind of frustrating in a state that doesn't make extensive use of mile markers. I also like that the ScanGauge has a Cat5-style wire you can disconnect from the unit which makes fishing the wire a lot easier.

In any case: I wanted to give this thing a shot on account of some of the features it has the ScanGauge doesn't so I'll give it some use before passing any judgement.

I wanted the gauge on the left-hand side of the dash but I'm not a fan of the suction cup mounts and they tend to fail pretty quickly with the heat where I live. I've loved my Bulletpoint "Taco Bar" so I figured I'd use their stuff to mount the UltraGauge. Their stuff is a bit pricey but my experience has been that quality is top-notch. I used their universal single ball assembly and just screwed it right through the dash garnish. The ball joint on the UltraGauge is too small to be directly compatible with the Bulletpoint arm sockets. I just shot a dab of hot glue into one side of the Bulletpoint socket and let it cure which gave it some extra thickness & grip to fit the UltraGauge ball just fine. Since the Bulletpoint hardware is aluminum it'll pull right off in the future if need be. Worked perfect.

 

The lowly SR doesn't have the fancy mirror so that's not an option for me. My Sequoia and Lexus both had the Home Link mirrors they were nice but a remote clipped to the sun visor did the same thing.

 

I can't get mine to synch with the garage opener.

 

radio and gauges were getting dusty so I used a 'NEW' make up brush to clean them, then flicked the brush several times to clean it and did it again.......worked real good and hopefully caused no scratches on the softest plastic known to mankind



ps: i'm not OCD enough to do the film protect kit thing

 

Got some stuff knocked out today.
Installed Meso total tail lights, mountain hatch tailgate insert, bullet proof fabrication front recovery points, and got the Agency6 hitch mounted recovery point.
Also washed the truck for the first time since November.

 

Been a bit since my last update, but between a 7 month old, catching Covid and then the flu, I haven’t had a ton of time for the Tacoma.

My audio upgrade is finally complete. Installed the OEM Audio+ Ref 500 system and then topped it off with a new Pioneer 6600NEX flush mounted.



Very happy with the sound, even before the HU upgrade. I more did the radio for wireless CarPlay and a cleaner look. I do miss knobs but I’ll get over it. Only issue I have is the backup camera isn’t coming on automatically in reverse, but I flashed the Maestro to turn on the cam with a long press on the call-end button so that will work for now until I’m willing to figure it out.

 

Looks great. Hate to hear about the rona issues. Welcome back!

 

Installed a new biological cat theft prevention system

 

R1 concepts, carbon alloy drilled and slotted rotors with ceramic pads, and extend stainless braided brake lines front and rear

 

Probably a dumb question, but the bed rack on this tonneau cover renders it unable to open correct? I went with the RCI rack plus a revolver x4 to keep the usability of the tonneau, but I'm not the biggest fan of the revolver.

 

Best little mod I did to the truck on day one. Highly recommend the screen protector.

 

@BlarBlarjosh I can still open each section fully with the cross bars mounted, it's only when we have the iKamper on there that it won't.

 

That’s the bee’s knee’s

 

Just ordered same off Amazon. A lot of the reviews seem mixed. Some come in damaged (i.e. scratches, scrapes). Others have come in perfectly fine. So I'm a little apprehensive about these. Guess I'll find out on Friday.

 

Okay that makes sense. I'll debate about that, I'd hate not to have easy access to the stuff in the back of the bed when out camping with the tent mounted.

 

TRD pro lights installed

 

@ETBA Bottom pic of your rig....looks nice! Wheel color works, too! As well as the RSI cap. I may spring for one of those when things settle down with availability.

I'm putting matte gunmetal TRD Pros on my rig Friday morning.