2016 Tacoma low beam not working

Driver side low beam does not work. High beam does work. Bought new bulbs twice. Same problem. Low beam does not work. High beam does work. Checked fuses. Changed the 10A which says H-LP RH-LO and the 10A which says H-LP LH-LO. I assumed the LH-LO was the one but after changing each with a fuse I know is good still same issue. Please help.

Passenger side low and high beams are working properly.

 

Figured it out. Maybe my ignorance will help someone else. There is 1 bulb for high and 1 bulb for low on both sides. Each bulb costs about $19 at Auto Zone. I thought 1 bulb was for low and high in one bulb. Good luck to everyone.

 

Glad you figured out the issue. If you have never replaced the bulbs, expect the other low to burn out soon. Always best to replace them in pairs when one goes so you're never caught by surprise. Also, check out the "Ultimate Headlight Upgrade Thread" stickied in the 2nd gen subforum.

 

Great advice. The other side burned out last month. I should've taken your advice then! Tks for your reply. Have a blessed evening!