What Have You Done To Your 3rd Gen Today?

Was this the universal bushing or the 2nd gen specific? I have the 2nd gen version in the cabinet but have also recently seen mention this could be linked to future sheet metal wear/tear under battery, just for the fact it doesn’t have as much give as the oem iirc so I put it on hold for now

 

What brand tint and percentage? Looks same hue and shade, I got ceramic on the fronts and not only is it slightly lighter it also has a blue hue that bothers me

 

So I confirmed the builtright bed molle panels have the same cutouts as greymantactical- meaning it will accept the mount plates. Single only tested but now to see if I can come up with a reason/personal use that would benefit over using the slots (not sure there would be one)

 

I got the relocation bracket because I didn't want to see the sensor. It looked like it was just a piece of plexy glass below the Toyota.

The mesh was separate. Didn't buy it.

Got the emblem off Amazon from the link provided. Cut the pegs off and double sided taped it on so it wasn't permanent incase my paint job got messed up I can remove and redo.

 

Bolts were sprayed in Krylon hammered black last night and carefully reinstalled. I feel better knowing 4 bolts I'd never noticed before now blend in with the headliner lol.

 

Looks clean! Now you need these glossy black inserts for the glove box (I have them in MGM and they're great quality and properly paint-matched). Tacoma Glove Box Inserts 2016 2022 3rd Gen Only color | Etsy

 

Not sure if they offer that style? But you can easily buy Kydex and make you own. I've made several sets.
The only reason I purchased a set of TufSkinz was I wanted to see quality of their lettering./graphics.


This picture you can see the rear flaps that I made out of Kydex.



This picture you can see the TuffSkinz.

 

How do you like the borla xs? I had one on my Sierra and absolutely loved the sound but of course that was a V8.

 

Below freezing... so maybe that was it!

 

Caught my attention.

I have the downward run off the exhaust manifold on mine wrapped. I was fully confidant that the heat there would keep any moisture away - and rust would never be a concern. Do you have any evidence of this not holding true? Please share.

 

Full detail and wash has my truck feeling brand new

 

Great idea! Just added it with some leftover silver reflective tape into squares.

 

Removed the visor decals with a hairdryer and a plastic pot scraper (scraper used for the one on the vanity mirror hard plastic). Touch of adhesive remover, then rubbed a tiny bit of mineral oil on the hard plastic (to refresh it). Nice and clean look now (no longer feel like I'm riding in public transportation).

 

Is the butt squatting a bit there, or is that just the angle of the picture?

 

Actually sitting on a hill, so I think that's why it looks a little off

 

I was hoping it sits completely flush. But I’m satisfied that it’s PnP. I just need a fast charger once in awhile.

$30 AINOPE 72W USB C Car Charger, for iPhone 16 Car Charger Fast Charging Adapter, 2-Port PD & QC3.0 Cigarette Lighter USB C Charger for iPhone 16/15/14/13 Pro Max, Samsung S23/S22, Pixel, iPad Pro

https://www.amazon.com/gp/aw/d/B09N9CSBC9?ref=ppx_pop_mob_b_asin_title

 

Did something similar on my driver's door with a decal. More for subtle asthetics but it does bring attention to the door being open.

 

I love it. It’s actually quieter than I hoped but I have future plans to add a URD Y pipe so that should help get it where I want. Everyone said get the 19” body version, I went with the 14” but still it’s not very loud. Really glad I didn’t pay any extra money to get it routed out the back, probably wouldn’t hear it at all then.

It really sounds good above 3500 when cam timing advances!

 

How are you liking your diamondback bed cover? I'm still on the fence about getting one.