What have you done to your Tacoma today? 1st Gen Edition

Callahan CCK11207 [2] FRONT Premium Grade OE Caliper Assembly Pair Set

Callahan BRAKE PARTS OE Replacement Front Brake Calipers Set [For 2001 2002 2003 2004 2005 2006 Toyota Sequoia Tundra 13WL Caliper Casting]

https://www.amazon.com/dp/B019NUG2MC?_encoding=UTF8

I can confirm these fit (they are the ones I installed)

They are cheaper than those Napa

There is no core charge.

 

Damn funny I came across this. He might be using me as his Guinea pug, said he was having to design a new kit for my 2013 D60 after I was being stubborn. It’s taking him a while to get it all together and not good at emails but trying to be patient

 

Super easy. Used the Scosche TA02B wiring harness

 

I've never understood this forum's general preference for the 01-04 front end. I personally don't like them and had to search extra hard for a clean 98-00 when truck shopping a few years back. The 95-97 is clearly the best looking but I wanted a passenger side air bag.

Where did you find clear TYCs?

 

They might’ve been Depos (Depots?) branded ones. It’s been so long I can’t remember.

 

Tested out the lights. The fender markers are my favorite!

 

Northeast ice storm. Ice grill

 

Looks good! I bought some fender marker lights from a land cruiser a few weeks ago. They came with the light housing, bulb socket and gasket but no harness with the 2 pins to connect. So I need to comb the junk yards for something that will work. Curious what marker lights you went with and the position. On the Hilux it looks like they are positioned level with the top of the fender flare.

 

do you have the part # for the gasket or did it come with the whole marker assembly? my side marker gaskets are so brittle.

 

PM'd you

 

Took off the stock nerf bars, I am loving the new look!

 

Just about done the swingout.. coming together nicely.

 

Nice!! Mine are from the Supra but I think they’re very very similar. I ordered a socket from Amazon. If you want I can try to find it! I referenced the hilux and kind of eyes where I want it.

 

Took longer to hide the wires than to hard wire it in!

 

looks great

 

Thanks for the pics showing where you positioned them. It was hard to decide on the style to use. I saw the Supra ones you have on Ebay. Those look really good! Yeah, if you can track that down on Amazon and send me a link I would appreciate it. Still hitting a dead end.

 

Did you connect them to the rheostat?

 

Got my fiberwerx +4" bedsides recently and put them on about 2 weeks ago



Today I sold my tailgate, used that money to buy the newer style door panels and installed them

 

Found them! iJDMTOY (2 912 920 921 T15 Nylon...

$9 iJDMTOY 912 920 921 T15 Nylon Base Socket/Base w/Pigtail Wiring Harness As Repair, Replacement or Retrofit

https://www.amazon.com/dp/B07GSK3ZKL?ref=ppx_pop_mob_ap_share


I will say that the o ring on these made my Supra ones loose. I had some Honda ones that had a thicker o ring so I swapped them out. If these don’t work, you can use Yaris ones too, and see if they fit. They should all be very close.

since mine didn’t come with a template, I drew one out. Lots of grinding slowly by slowly.


And i basically used the “toyota tacoma” emblem as a guide with my 99 degree to get it consistent on both sides. If you have any more questions man, feel free to ask!

 

Whoops I accidentally replied to the other post but it’s above this one