What Have You Done To Your 3rd Gen Today?

Mounted a Safariland fork system inside my center console so my handgun doesn't flop around in the console. It's tight but fits absolutely perfect.

 

Put the wind sail on for the drive to Jackson in a few days

 

This is how I ended up grabbing some AT's. Got stuck wheeling with a buddy

 

Must be the screw wasn’t in as tight as others have experienced. Guess I was lucky.

 

Perhaps you just selected a more appropriate Philips bit.

 

Not pictured - signed up for a monthly car wash subscription at one of those conveyor belt car wash joints only because I want to blast the shit out of my undercarriage. If it manages to clean up the rest of the car so be it. Gonna try and make it a habit of doing it once a day every day in any given month lol...

For a $1/day I'd say it's a small investment in (trying to) ward off the corrosive effects of mag chloride on my Taco every winter and spring...

 

Agree with this. Just did Camburg UCA's on my 2021.

Spend the ~35 dollars and get two new UCA bolts from Toyota.

Undo the OEM bolt, and slide it out a few inches. Grab your sawzall and chop the head and a bit of the original bolt off. Remove the bolt towards the rear of the truck without needing to bend any sheet metal.

Reinstall the new UCA bolt from the rear, towards the front.

The hardest part after that is getting the 4 washers where they need to go.

 

Hello! New to the forum. Little lady looking for advice for my new Tacoma. Excited to be part of the club.

 

Welcome to the black hole of ideas, mods and money spent on making your Taco your own.

 

Welcome. Hope you got multiple sources of income.

 

This method makes me uncomfortable. If somehow that bolt works its way loose, the UCA bolt can just fall out when installed in this orientation. It's not that difficult to install these properly. Reinstalling those UCA bolts is really overhyped from the reviews I've read on here. Was nowhere nearly as bad as how most people make it sound. More difficult on the driver side but really not bad. If you can get that far into the suspension install yourself, reinstalling the UCA bolt's properly isn't much of a hassle. Not saying this is guaranteed to happen.. but IMO, do it the way factory did. They're that way for a reason.

 

Autobahn88 Door and Granish Molding Clip, Compatible with Toyota (OEM: 67771-58010) (Pack of 10)

https://www.amazon.com/Autobahn88-D...refix=toyota+67771-58010+,aps,57&sr=8-1-spons

 

Never updated y’all but I had a 2.5” lift and 33” MT Yohohama Geolanders installed after having the cab mount chop performed. Love the feel of the ride since.

 

Toyota factory service manual shows them being run in "backwards" for replacing UCAs on Tacoma. Make a witness mark, the UCA bolts are not going to wiggle out.

 

Ehhh.. still personally not about it. This has been debated a bunch. Do what makes you happy though. The added security of throwing them on correctly makes me sleep easier.

 

how long did it take? how do you feel about the quality? is this the east detailing one? if it it ive ordered mine and its on the way and im looking forward to it

 

This might be a little too ghetto for some, but for those who don't have bed lights this was an easy $20 option. These lights have a motion sensor plus a power button so you can choose to leave them on/off as well. I used 50lb heavy duty mounting tape to adhere to the bed so all I would need is some adhesive remover to return back to stock if I decided I didn't like them.

 

Welcome! Drive it stock for a few months until you figure out what you want to upgrade or improve. Then hang on to your wallet extra tight, because you'll see stuff you never thought you needed before and it adds up quick.

 

Welcome to TW!

 

I definitely will bro. I appreciate all the info. Super helpful. I’ll tag you in a few months when I make it happen. Gonna pay off the remaining 11k and then continue to mod away after that. Front bumper / winch set up is first on the list. Thanks again!