Alignment help

I got a 2018 Trd pro with a Westcott lift kit on with 285 tires also have SPC UCA
I went to Firestone for alignment and they did what they could according to them but my caster is way off here are the numbers what do you guys think

 

That looks great!

 

Looks like a proper alignment to me.

 

Only thing IMO CAMBER should be 0 - 0.3.

 

Oh ok Firestone did not touch the caster setting on the UCA the person who installed them happened to set it at the current settings

 

I agree. Mine is set to 0*.

 

Looks good...
What surprises me is how good the caster and camber were prior to the alignment. Plus, cross-SAI looks good. It usually increases with lift. I suspect it happens more when taco lean is addressed in the lift.
First alignment after lifting?

As far as positive camber... it's used for stability and reduced steering effort; +0.5 is spec. As dynamic forces 'push' the tire back around the caster and SAI angles, it zeros out.
Positive camber also plays a small part in scrub radius. Moving camber towards zero will increase positive scrub.

 

Bang on.

This is why I edit specs for lifted trucks. People see red and worry.

 

How does it drive?

 

Drives good … why ?

 

Driver side passenger side

 

Not editing it is just lazy. Most people can't read these things nor do they know acceptable numbers. Hell, I don't know what most of it should be but I did the research. I'd still question it if I saw red.